All posts tagged Zeiss Conquest

Bringing an old gun to the range

I have some funny experiences to share when it comes to choosing guns and calibers for long range shooting.  I use to be a member of a gun club that went out to 600yds, but it has long been closed down.   When I was working on zeroing a DSA STG58 rifle at a 500yd target, I wasn’t getting any better than 10 inch groups at 500yds, but that wasn’t too bad considering I was shooting military ammo.   That is just roughly 2 MOA at that range and for a gun that was a standar barrel and not match grade, I was pretty happy with it.   I have had some issues with the DSA FAL mount I have, but since I have loctited the mount, it hasn’t come loose on me.

While I was shooting there,  an old guy showed up with a 45/70 and a 12 inch box that he was going to shoot.   He fired at 200yds to check his iron sight zero and it was dead on, he moved the box out to 500yds and asked me to spot his bullets for him.   He took one shot and hit just in front of the box and then made an adjustment.  I had one of several Leupold 3-9×40 tactical rifle scopes A few seconds later he fired a second round and nailed the box.   He said I could shot at the box if I wanted to so I did.   My gun could hit it, but I had about a 50% hit rate when shooting off of the bench while this 70yr old guy hit the box every time with iron sights.   I’d like to know where that guy is these days because it made me realize that just because you have a modern firearm, doesn’t mean you are going to be a better shot them some old guy with his 45/70.

Top

Optics that hold zero

There are a great many  things that I have learned over the years about what is a combat worthy firearm and what is a hobby type of firearm.   I have seen such huge variations in AR 15 rifles that I really can’t say that some manufacturers of direct impingement firearms are less reliable that gas piston guns.   There are some variations in the older design that have machine their parts so well that they really do run on less lubrication and have run in some tests off thousands and thousands of rounds with out failure.   I will say that gas piston guns will run cleaner, but are they more reliable than a high end AR15?   I don’t think most of us will really ever know the answer to that because there are always variables in how a firearm is maintained and in what climate and conditions it is subjected to.

If I had to issue handguns and rifles to relatives, I’d probable go with a gun that is easy to clean and easy to shoot, if I want a gun for myself, I’ll take the guns that work the best for me.   I know I put more effort into making sure every rifle I own has the right parts staked and loctited down.   I have broken a few Tasco and Simmons optics, but I have never had Leupold rifle scopes, Zeiss or Trijicon optic fail on me.   There are faulty mounts and scope rings out there, but even the less expensive ones will work if you use Loctite on them and don’t over torque them.   Over torque screws on firearms can mean broken screws and I have learned that the hard way with a DSArms SA58.   The FAL is not a very good gun for using optics, but it can work if you lock everything into place.  Cleaning the guns with this scope mounts is difficult, but the FAL can be made into a good DMR gun.

Top

Ruger 10/22 range day and scope options

I’m brainstorming with this blog post so give me some of your advice if you have any on what to put on my Ruger 10/22 rifle.   This is a standard 10/22 and not a tricked out barrel or trigger.   I purchased all of my 22lr for new shooters to learn on and didn’t want to get too fancy with optics in the beginning.   After picking up a Marlin Model 980 bolt action and having the rear sight replaced with an adjustable elevation like the standard 10/22,  I haven’t had the urge to buy another optic for this gun.   Many bolt actions are capable of shooting quarter size groups at 100yds with the right kind of ammo, but even though my bolt action has that capability, I still wanted it for novice introduction to firearms.

My ruger 10/22 was a training gun, but after recently doing some aggressive testing between the two, there was no comparison in accuracy.   The bolt action was shooting dime size groups at 50ft and the Ruger was shooting 2 inch groups with the same ammo.   I’m thinking about picking up a rifle scope for this gun that is either a fixed power or a red dot.   I have a Butler Creek 25 round magazine that I have yet to test out, but it could be a good close quarters combat training tool for wiping out soda cans and other carbonated reactive targets.   I had an Eotech 552 on a Ruger Mini 14 and had fun with it, but went back to a 3-9x40mm scope because it just seemed more practical.

Top
Page 1 of 1