All posts tagged Wilson ETM magazines

Quit screwing around with your 1911s and they’ll work

There is no other firearm that I see so much tinkering with than the 1911, and no matter how much money you spend on one, you can still mess it up.   I absolutely do not believe that higher end 1911’s are tougher and more reliable than a loose fitting GI Mil-spec gun.    If you want that competition shooting gun, then shoot it in a competition, but if you want reliability, keep it simple and stop screwing around with it.   I have putt thousands of rounds through my GI 1911 guns and almost always use ball ammunition.  I’m messed around with semi-wad cutters for target shooting and got my guns to feed with them, so I know it’s possible to shoot something other than ball.

The gun magazines you use for your 1911 are the difference in running a reliable firearm.   From my experience GI 1911 magazines are meant to be used a few times and tossed on the ground.   They are not worth replacing gun springs on like Wilson Combat magazines.   The magazine bodies on many 1911s get dented and don’t hold up and will eventually just jam up the follower when it is working it’s way up.    The Wilson Combat Elite Tactical magazines or ETM, is a minor improvement for a few bucks more.   The magazine body is a little thicker with changes to the placement of the ammunition level window.   There are also numbers from 1-10 on the bottom of the magazine so you can just take a hi-lighted marker and number the mags with one stroke without damaging them.

Top

Bring out the 45acp’s for the Zombie Shoot

This weekend will be the 2nd Contagion Zombie shoot at the New Holland rifle and pistol club.   It often amazes me at the selection of firearms that you see at these events and one of the most common things I do see is an increase in the number of 45acp guns.   Shooting steel with 9mm guns can be a lower knock down rate.  It’s kind of funny how people say the energy is the same form a 124gr Nato round vs a 45acp, but when it comes to hitting steel, they are not the same.   The 45acp especially the 1911, Sig 220, Springfield XD and Glock 21 are the most common and every once in awhile we do see a few H&K firearms.

When it comes to shooting a 45acp,  I personally think American Eagle ball ammo is probable the best round to carry, even though some may say that HP ammunition has improved so much that it’s a better option.   I have never felt like carrying ball ammunition in Wilson Combat Magazines meant that I was going to be punching holes through every wall in the house because from my experience the 45acp does not penetrate as much as the 9mm ball ammunition.  There are so many 1911 guns out there that I could not say that the 1911 is a dated firearm that can not handle various types of ammunition, but you do have to be careful about the GI versions of the gun and hollow point ammunition.

Top

New DVD from Dean Caputo

I just started getting through another Make Ready DVD this week after last weeks Dean Caputo AR15 Armorer’s bench DVD.   The first 75% of the AR15 was all stuff that I already new about and I was really starting to think about skipping over a few of the chapters and getting to something new, but I sat and thought to myself that I can’t say I watched it if I didn’t see the whole thing.   It’s kinda like all of the people that go to Mass on Sunday and walk out after Communion, but the Priest gets pissed and says that Mass isn’t over yet.   Well, Dean Caputo wasn’t talking about God, but he’s been talking about the AR15 and the 1911 and according to some people, those are holy things.

The 1911 is probable the most tinkered with firearm that I know of.   I always think of the 1911 as being the GI Mil-spec gun and a lot of the 1911’s I have seen from Kimber and some custom shops aren’ t really 1911s to me.  I’ve changed sights and triggers on my guns but I mostly stick to GI looks and Wilson combat magazines.   The magazines have always been the weak points on the 1911 followed probable by the throat.   I have no real interest in using HP ammunition on my 1911s because I feel like I’m compromising reliability.   Dean’s DVD’s are very good for basic information and he gets into basic history, but the best  thing about the DVD’s is his thorough and organized manor of explaining the parts and how to trouble shoot.  The trouble shooting was something I was not aware of.

Top

The importance of drop free magazines

You need to test your gear and accessories out to know for sure that they work on your firearms because there are so many variables in manufacturing that even the same company can slightly alter a mag well or magazine.   There use to be enormous problems with some AK magazines because not all Communist block countries made them the same.  I had a friend that picked up about 20 AK mags at a gun show and thought he’d stock up on them, only to find out that he had to take a file to most of them because they wouldn’t lock up in the rifles.

When it comes to handguns, the biggest problem that can occur once you get away from Factory magazines for a 1911 are that they don’t drop free.   1911 guns are not know for being very tight when it comes to tolerances and they are for the most part drop in guns.   Wilson Combat magazines are very sleek and are the number one magazine I see at IDPA competitions.   I have 5 1911 handguns all from different companies and Wilsons 7rd and  8 rd are all I ever use.  I think  the guns look better with flush fitting magazines, but reliability is the most important.

Top

Tactical holsters for secondary firearms

One of the first holsters I ever purchased that was not specifically for concealed carry was an Uncle Mike’s gun holster.   It had a metal clip that that was very secure on a belt, and it was made of nylon.   It worked very well for me for several training sessions and it had a front pocket that could hold a double or single stack magazine with a velcro strap to secure it.   I never had a real problem with the holster since it is made of nylon and isn’t as harsh to lay down on as a paddle holster.  Many paddle holsters aren’t going to tolerate roll overs.

I have thought long and hard about what type of handgun to have with me as a secondary firearm and the thought came to me that it really should be all about up and close fighting and then flee the situation and clear my primary and get back into the fight with that.   I don’t carry about caliber wars between 9mm and 45acp, I will gladly fight a handgun battle with an M4 Carbine.   My secondary firearm is a  fitted with Wilson Combat magazines for a Colt 1991A1.   I carry one mag in the gun, and 2 in a vest pocket.   I don’t think over loading myself with handgun ammo is a good thing and 24rds of 45acp is good enough for me to fight my way out of a situation.

Top

Favorite guns for IDPA

I’ve been fortunate enough to attend some of the IDPA National competitions in recent years and it has still amazed me that the 1911 is the number one firearm that is being  used.    I’ve spent enough time on the range to know that the 45acp is more consistent in knocking down targets and makes bigger holes.   The triggers on the 1911 design can be sweetened and even though there are some draw backs to the 1911 design, for competition, there aren’t any.   Glocks have a good showing because they have a consistent trigger design like the 1911, but they are very different to shoot.

I understand that many shooters will probable shoot a 9mm more proficiently over a 45acp and I have done personal evaluations of novice shooters and done comparisons.   The 9mm is easier to shoot and will most likely get you a higher hit percentage. For more advanced shooters, they won’t have problems with the 45acp.  Wilson Combat magazines are still the number one 1911 gun magazine that I see at these events followed by Chip McCormick.   Every 1911 design can be tweaked and modified just like a pile of Legos.

Top

Wolff gun magazines and Wilson Combat

I finally got to pick up a few of the Wolff gun magazines that some of my friends have raved about and I’m still trying to find out how I didn’t know about these for so long.  I guess getting stuff made in the  gun accessories and firearms industries is getting easier now and many companies can go out there and just find somebody with the tooling.   These did feel more like Chip McCormick magazines and they were fairly close in design.   The one thing I know to monitor on 1911 metal magazines are the followers which is something I’ve had problems with in the past.  Usually it was the less expensive and practically considered to be thrown GI 1911 magazines.

Something I’ve seen happen on less durable 1911 magazines it that they will not hold up very well at all if you one up the guns.  If you have an 8rd magazine and put one in the chamber and then load it back up to capacity, you are putting slightly more tension on the magazines and the cheaper mags, and the magazine springs will fail you.  Wilson Combat magazines, Wolff 1911 magazines and Chip McCormick magazines will hold up.  I had problems with Colt magazines, GI magazines and some MecGar magazines when I did this and always had 2nd round malfunctions.   I’ve learned to not on up the guns, but single stack magazines seem to handle this better than double stack.

Top

Valley Forge Gun Show in PA, finding gun parts

It has been  year since I got out to the Valley Forge Gun Show here in Pennsylvania.  It is probable the 3rd largest gun show after the Pittsburgh NRA Convention, and the Harrisburg Farm Complex.   There are some pretty big fluctuations from year to year.   Two Years ago there was a run on ammunition and firearms because Obama was elected.   Then move forward 2 years and there are a lot of good deals on used firearms because all of the people that lost their jobs are looking to get there money back.   I predicted that and I also predicted that there would be a reset on ammunition prices.

This weekend I went to the show to price gun magazines, ammunition, rifle accessories and reloading supplies.   I picked up large primers, small primers, pistol primers and rifle primers just because I could.   That was another thing that just flat out disappeared.   Primers seem to be under $30 now and that’s not too bad.  I next went to the pistol and rifle magazine section and picked up Glock 19 magazines.  I saw piles of Wilson Combat magazines, but I never noticed any shortages on those magazines, EVER. I noticed the Korean Glock 19 magazines looked well made, and they were only $10 each, but I didn’t want to take the chance since I knew nothing about their reputations.

Top

IWB carry for a 1911

I have always thought that carrying a full size auto meant carrying the gun in a paddle holster or a shoulder holster, but that like many other conclusions has changed.   I have never been afraid to just carrying one firearm and not have to worry about carrying backup magazines although I’m not going to tell you that  you need to do the same.  With the prevalence of people carrying cell phones on their belts, you do have to be careful about where you are placing  your spare gun magazines.   There have been times where I have noticed that certain types of shirts and sweatshirts and even some jackets will ride up too high on my waist when I am trying to retrieve my cell phone.

If I am going to an environment where deep concealed carry methods need to be employed,  sometimes we may have to stick to just one gun and avoid carrying spare magazines on the waist.   I have thrown spare magazines for my Colt 1911 in a pocket, usually my Wilson Combat magazines but I have found all too many times that my 5.11, Woolrich Elite or Eotac pants will eventually work a bullet out of the gun magazine and that’s not a good thing.   I think the only other deep cover option I would consider would be a ankle holster that could carry spare magazines for an auto.   The good thing about the 1911 design is it’s slick thin design.

Top
Page 1 of 1