All posts tagged Kahr holsters

Be careful what you decide on for a pocket holster

They are not all the same even though they are probable all under $20.   We have several people coming in here and looking at the various pocket holsters and giving us some feedback.  I personally have a stockpile of Uncle Mike’s holsters that I picked up at gun shows and and ended up retiring them for something a little bit more sturdy.  Not that Uncle Mike’s products are crap, but they aren’t the best product for the buck.   I have carried Taurus revolvers in the past with clip on inside the waist band holster but the belt clips did not hold up when you bent over.  A good gun belt like The Wilderness or an Elite Survival Systems belt namely the Cobra Belt are great options to reduce this, but why not do something more secure.

The Uncle Mike’s holsters I have that were pocket holsters had a small piece of fabric that is suppose to cause some friction when the gun is drawn, but it’s not that good.  We have leather, nylon and kydex holsters here but the Desantis holsters that we sell a lot of are the Desantis Nemesis pocket holsters.  They have more friction material covering the outside of the  holsters, but they are closer to $20.   The Elite Survival Systems pocket holsters a huge seller because they are just as good and about $50 cheaper.   The Woolrich Elite Chino pants that we sell are probable a big hit in store, because the pocket holster shoppers are always looking for concealed carry pants that work for them.

Top

What do you want with a pocket holster?

This is one of those issues that I have lots of first hand experience with but you would think that it’s a simple way of carrying a firearm.   I still run into  people that don’t use holsters but in the age of Glocks and firearms with no safeties, I do not think it’s a good idea to have a firearm in tow that does not have it’s trigger covered.   If you wouldn’t carry a knife that is un sheathed why would you carry a fiream without a holster?   I have tried to carry firearms in my pants pockets several times in the past but I have had several failed attempts.   Both times I was carrying j-frame revolvers and either the gun didn’t sit deep enough or I had snagging that was unacceptable.

I’ve used Uncle Mike’s pocket holsters in the past and they were OK, but I’ve taken fabric scissors to them and had to make adjustments to avoid the snagging issue.   One of my favorite new Desantis holsters is the Desantis Nemesis, they are more money than the Uncle  Mikes pocket holsters but they do a better job of slipping free when you pull your firearm.    Pocket carry is something you really have try out with your clothing and your method of carry.  I’ve seen guns fall  out of pockets when people go to picnics and that is bad.

Top

Different modes of carry doesn’t mean you should skip the holster

I am a firm believer that people should consider atleast 2-3 concealment options for each of their firearms.  Not all firearms can be carried in a pocket and some are too darn heavy for ankle holsters but just because it’s a small gun doesn’t mean it’s always meant to carried in  your pocket.   Inside the waistband is the best way for most firearms to be carried but it can also be the most  uncomfortable.  There are certain things you need to consider when carrying a firearm in this manor and I would highly recommend elastic waistband pants.

We will become a full line dealer for desantis  holsters in the coming weeks and Pocket holsters are something you should always consider for your pocket guns.   Pocket lint and tumbling can occur with firearms and the Desantis holsters that we recommend for LCP users is the Desantis Nemesis.  Sometimes people thing that since it’s a pocket gun, you don’t need a holster.   If you don’t use a pocket holster I guarantee you’ll need to cleanin your firearms more often.  Some lint will still collect on a pocket gun but usually just around the hammer and firing pin which can easily be cleaning up with a q-tip.

 

Top

Concealement holsters and durability

I have recently been getting harsh on some gun holster manufacturers about the clip on IWB style holsters.  I got a dud from Galco recently and I was greatly disappointed.   I picked up a Galco Triton holster because i am trying to get away from using leather holsters in the Summer time and moving towards Glock and Springfield XD firearms for primary carry.   The problem is the clip on belt design.   Why do people not put some thought  into these.   I have had holsters fail me even though I had a good Wilderness Instructor belt on.   There are movements and things that can happen that can dislodge the holster.  That is not something that should ever occur.   People that are not that physically active may not notice it, but it can happen.

The Galco tuck-n-go is a nice holster but leather holds sweat and I don’t want to ruin guns or damage them nor do I want to have to clean them every week.  My Sig Sauer collection shows the rust on the grip screws and it’s not the fault of Galco holsters, it’s just something that can happen if you carry often.   Glock firearms don’t rust anywhere near what my Sigs do and it’s time for me to move on to doing something else.   I am trying to avoid having to get a custom firearm holster done, but I am not happy with the IWB Kydex holsters I have tried out so far.  I will continue my search for a non-leather holster and let you know how it goes.

Top

Magazine pouches, fobus vs Blackhawk

I have had a lot of experience using nylon gun holsters and I really can’t say anything bad about them except for the thumb break stile holsters.   I’m not a big fan of holsters with straps on them and I presently only prefer the Blackhawk Serpa holsters for locking and firearm retention.   My Fobus holsters have always served me well and I believe I may own one holster for every medium and large frame auto in my collection.  Fobus makes a nice paddle holster, but I have had experience with the magazine holders and I am not a big fan.

I have quite a few nylon magazine holders and they are very good and keep the magazines where I want them, I do not like to use the nylon magazine holders for CCW and after a short stint at using the Fobus holsters magazine holders, I found out that there is a limit to how many paddle style holsters I can wear comfortable.   I do not recommend the fobus paddle magazine holders because you will feel it dig into you if you have to roll around.  The Blackhawk single and double stack magazines are the best because they actually have tension and mags won’t fly out easy and they aren’t covered like a nylon magazine holder is.

Top

The importance of practicing with your CCW

There are many times in our life when we just won’t have time to get out and go shooting, married life and children can always shorten your free time, but lack of gun maintenance and shooting rehearsal will affect your performance.   I recently read an interview with the Philadelphia Phillies Manager Charlie Manuel and he mentioned that he won’t let anyone walk up to the plate during the regular season unless they have had atleast 75-100 pitches in batting practice.   The hand eye co-ordination is something that get’s lost and even the best guys are terrible at bats if they haven’t had practice, shooting skills are no different.

Regular cleaning atleast once a month in the summer or hot weather depending on the type of gun and holster you are  using and I strongly suggest you put 50rds through your firearm atleast once every 3 months.   Fobus holsters will work for you for CCW, but you will need a vest or long jacket to use such a paddle holster. Considering how inexpensive these holsters are, I would suggest getting one even for something like a J-frame which tends to be a pocket gun.   Practicing from concealment is good practice as long as your gun range allows it.

Top

Keeping it lightweight and simple

I know the idea of keeping it simple may mean carrying a larger auto and no spare magazines for concealed carry, but my idea of keeping it simple is usually pocket carry.     Sometimes people can go overboard with the CCW and even though you are well withing  your right to carry a gun legally, if you are packing too much gear, there’s a pretty good chance you will eventually be outed or “made” by someone that you don’t really want to know what you are carrying.   I have had atleast 2 times in my life where someone I barely knew, figured out real fast that something metal on my belt line, that wasn’t where my cell phone was. was there.

Every time you walk past someone in a close environment, there is a good chance you will get an “excuse me” and they will bump up against you.   People don’t realize how often it actually occurs, but elevators stares, doorways ect, are known for bumpin.   Carrying at social environments like business meetings is something that even more bumping can occur.   Sounds funny, but I speak from experience.  Sometimes I carry a Kahr K9 in 40 in one of my many Galco holsters that is an ankle holster.   This is one of the best ways to avoid bumping and being made in a white collar or close quarters social environment.   Find a good gun shop that allows you to try them on.

Top

Buying used guns that have hardly been used

I recently jumped into the world of Glock ownership.   It is a used Glock 19 which is a Generation 2.   I got it fora about $400 out the door and even though it has a little bit of holster wear.   The barrel looks like it has less than 500rds through it.   It’s funny how many times I’ve picked up a new firearm from a gun shop that had a few dents or dings on it but the internal parts were hardly worn.   I’m sure 90% of the lever action and bolt action firearms you see in the used section have the same history, but you should always inspect the internal workings before purchasing.   I’ve seen excessive wear on firearms due to lack of cleaning and lubrication and although the guns haven’t jammed, they had less than 1000rds through them and look really beat up.

There are great deals on used Sig Sauer pistols, Glock firearms and Beretta 92FS types.   These guns were standard issue for most of our LEOs in the last two decades and many are switching over to other types of autos.   Smith & Wesson and Springfield Armory have put out there own handguns that have taken a bite out of the Glock stronghold, but I won’t pick a winner  yet.   I prefer to have atleast a paddle holster for each handgun I own and gun holsters for concealed carry if I am expecting to carry it at some point.   The only handguns I don’t have holsters for are a Ruger Single Six and a Ruger MKII pistol.   These are primarily plinking guns and not going to be carried.

Top

Protruding magazines, snags and sights

As someone in the tactical gear and accessory business, I am a little overwhelmed by the number of holsters that are available and how they are being used.   I get questions about how to assemble and modify various things and often it takes a little research to find how to answer a customers questions.  Something that I am finding more and more about is that customers are ordering holsters for firearms knowing the gun should fit the holster, but the sights that they put on the gun are now causing the gun to snag when being drawn.

The best way to know that you have tactical gear that works is to test it out,  even if you have done research into matching up the correct gear, practice with it before you actually train with it or god forbid have to use your gear and training in a real situation.   Pocket gun holsters and clip on holsters tend to have high rates of failures in Defensive training classes.   The real reason is that many of these students are practicing with higher levels of stress and doing things that they didn’t think they would be doing and causing guns to spin in their hands when the front sight snags in the  holster.

Top
Page 1 of 1