All posts tagged CMMG Uppers

The answer to what you want is to go to a store and hold it in your hands

I use to organize lots of gun club events and the best thing about it was being able to try out things that my friends would show up with.  We would even put out requests before hand and ask people to bring a certain firearm out if someone owned it.   It was very cool to have some of my requests fulfilled when I got to shoot a 5.45×39 AK next to a 7.62×39 one.   I did some long range testing with it and anyone with an honest mind will tell you that it makes sense that the Russians switched over to the 5.45×39 caliber.  Shopping for gun accessories online can be a pain and sometimes it’s always best to go back to the manufacturer and ask them.

We’ve had to sell off some of our high end upper receivers whenever we found out that a new version of this was coming out.  Sometimes a slight spring or finish occurs on the AR15 complete upper receivers and its all of a sudden an old version.   Just look at what Glock did with all of the Generations of Glock firearms and the infamous recalls.  I am never one to be the first to buy a firearm because ever since the XD45 came out, I saw guys send them back to the factory for improvements.   That never happened to me with my Sig Sauer pistols so it’s sometimes best to know you are venturing into unknown territory if you try something new.   Ask questions and try things out or put on your Lewis and Clark.

Top

Have enough guns? How about more upper receivers for your AR15?

I don’t think you even need to worry changing calibers if you want something different than a 556 upper.   I’ve seen guys turn an M4 Carbine into a varmint rifle with a snap of two pins on a lower receiver.  The real thing to look out for is changes in calibers, namely to a 5.45×39 upper.   Many times I’ve seen guys skip the hammer spring change and end up with a light strike issue with Russian ammunition. We sold a ton of the Smith & Wesson 5.45×39 uppers a few years ago but for some reason they just don’t seem to be available.

 

The LWRC M6Ak was a one off novelty deal which died a quick death and no word if it’ll ever happen again.
Right  now the biggest selling upper receiver we have are the Adams 5.45×9 uppers.  I had a customer take apart his gun side by side to my AR15 complete upper receivers and compare the piston differences.  There is a difference and I still love my LWRC M6A2 but this gun was a next best thing and a best thing for a 5.45×39 upper.  You still can’t beat the cost of ammunition for these guns and the  caliber does have a better reputation than the 30 caliber AK.   I’ve known guys that took hits from the AK it has so much energy that it just zips through you and the Russians finally caught on that the 5.56 was a better combat caliber.

Top

So many choices and so much good stuff!

Instead of getting a new AR15 upper receiver with a longer or shorter barrel, instead of buying a better quality bolt carrier group or doing some minor tweaking, just change the furniture.    Magpul industries is King of the AR15 accessorizing and the new MOE products really do give you something new to adjust to.   We have a blue rifle that we attach accessories to and let our customer hold them in their hands and try them out.   All gun grips should be customized by the shooter because just like footwear, our feet as well as our  hands come in different sizes, so why would we issue the same size rifle stocks or attachments to a Carbine.

A good operator knows that this is true and each of us has to be able to adjust our accessories to the job that we intend to do with our Carbine.  We have sold a lot of CMMG and Spikes Tactical uppers as well as many of the higher end AR15 uppers like LWRC and Noveske.   There isn’t really much of a difference between these guns as far as reliability, but there gas piston guns are much lower maintenance.  This year Spikes Tactical uppers have been so hard to acquire that many have actually chosen to save up their money and pick up piston driven uppers.  We’ve sold more LWRC M6 uppers this year than ever before.   Stay tuned for the new M6A5 coming out later this summer.

Top

LWRC M6A3 now a thing of the past

We just got word that the LWRC M6A3 is on the chopping block but right behind it is the new LWRC M6A5.  From the early info we have gathered so far, the M6A5 has a 2 position gas regulator and that is the only difference.  Not sure about any other changes but I think this was just a simplicity issue.   There is nothing wrong with simplifying a design because some gun parts and accessories can wear out or be hard to place or are just a wast of manufacturing time and energy because it is not necessary.   We have seen LWRC stop the M6 rifle because it was just so old and the demand for something more on a carbine was there.

I still have my original LWRC M6A1 carbine and I love it although it isn’t the same guy it was when I first purchased it.   The thing about the AR15 upper receivers that I have held and shot, is that there are so many configurations and variations out there that sometimes the guns are just flat out not the same.   The AR18 is also know where near the same as an LWRC gun nor is it like the Sig 556.   There are differences between rifle grips and some are mil spec and some are commercial

Top

Too much to think about or lots to think about ?

After watching many Youtube videos about what is coming out in 2012 I was mostly bored out of my skull trying to understand why I would bother spending another $2000 for an AR15 that is slightly different than what I already own.   Sure there are improvements but spending $2000 on something that is 5% more of a gun than an AR15 that you already own doesn’t justify the cost.   I am a big proponent to upgrading what you have.   There was a really good article in Swat magazine years ago about improving what you already own and the small things you can do to improve your AR15.   Replace extractor springs, stake screws, lube your gun right and you’ve just improved your gun for less than $150.

If you are looking to make your Carbine a firearm that you can rely on, make sure you don’t over think the configuration and setup.   I understand why people spend $2000 on AR15 upper receivers that have folding front and rear sights, but if you have folding front sights keep in mind that you have one more step to getting your firearm up and running and that is something to seriously think about.   I am a firm believer that people need to adapt to weapons and gear and not always expect to adapt the firearm to them.  Fixed front sights have been around for a long time and I don’t think changing that another thing that needs to be folded or screwed on is worth the liability.

Top

Lots of people wondering what happened to the LWRC M6AK

We sold off the last of the M6AK rifles a few months ago but people are still calling and asking about them.  I remember being in the LWRC facility a few years ago and it was just at the beginning of the product run.  I was told second hand that the M6AK rifle was made of left over parts from the other M6 rifles and it was a one off product thing.   I have seen a lot of the Smith & Wesson 5.45×39 uppers go out the door with very few complaints, but I never thought it was a great idea to make a gun in 5.45×39 that was a direct impingement gun.  Just too damn dirty if you ask me.

The LWRC guns were all sold out and gone about a year and half after production and that was it.  As far as AR15 complete upper receivers,   The Adams 5.45×39 seems to be the next hot seller.   You will have to replace the spring in your lower so expect to designate a lower for this caliber.  It’s not a good idea to be lazy and not replace the hammer spring on your firearm. The great thing about AR15 uppers is how interchangeable they are but once you get into caliber variations, you probable want to just get another gun.

Top

Gun Parts and AR15 accessorizing

Those statements can give some people a stroke, but once you’ve been there and done that, you hopefully have arrived at a happy medium.   Put me down as someone that was not a big fan of the AR15 design because I never understood why a gun was designed without worrying about how much maintenance it needed.   Don’t tell me that Eugene Stoner knew the gun was designed to do what it is doing today.  There was basically a disaster in place when the guns were first fielded and not until recently have the vast majority of AR15 owners realized that the direct impingement gun needs to be generously lubricated at all times to be functional.

There have been many improvements over the internal workings of the firearm from barrels, chamber chroming, gun magazines, improvements on ammunition and even changes to barrel twist have all gun us to where the M4 carbine is today.   The next major improvement with the M4 Carbine and M16 family of firearms is a lighter carbine like replacing your AR15 upper receivers without the compromises in durability.  That is something that has still been unproven with some of the newer lightweight uppers because of the time they have been out, but only time and testing will tell.

Top

AR15 upgrades without the hassles

There are enormous numbers of things you can do to customize your AR15 style rifles but one thing to consider is every time you do a gunsmithing job to your firearm, that’s one more thing that may not be  installed correctly.   The more you add on, the more can fall off, that goes from changing magazine releases, trigger guards, triggers, hand guards, gun grips and and more.   Instead of taking everything off of your firearm, it’s really better to just get another upper receiver or another firearm.   Especially if you think there is a chance you won’t like the modifications.  Piston conversions are another thing to be careful about because the gun should be functioning reliable after the changes and not less reliable.   And remember don’t fix something that isn’t broken.

Going back and forth from a direct impingement firearm to a pistol driven gun and then back to DI is a bad idea.   There are some really cost effective versions of the piston uppers like the CMMG uppers for sale at Rogue Elite.   LWRC is still the king of the piston driver uppers especially after the new lightweight upper receivers have come out that are just slightly over $1000.    The M4 LEPII is a popular upper receiver and only change of your recoil spring should do the trick.   The key to maintaining a reliable firearm is to maintain it, not constantly mess around with it.   If  you want to do minor changes, go ahead, major changes to a firearm, get a new one.   The cost in time and money may be about the same.

Top

Rogue Elite now has a retail location

We are proud to announce we have moved from being an online E-commerce business to having a retail location.   We will be expanding our inventory and our location in 2011 but many of our customers in the Northeast have been asking us to open something in this area and we finally gave them what they were looking for.    Our  tactical clothing lines from Eotac, 5.11, Woolrich Elite and Tru-Spec.   Buying clothing online can be difficult and when people live an hour away from you sometimes they just want to drop by and try something on.   We have a pickup location and if you call for an appointment we can arrange to have the items you are looking for available to try on.

We are a showroom account for many tactical gear and tactical accessories.   Eotech, Trijicon and many gun optics will be in stock at our Broomall location.   We will be supplying many products for Philadelphia Police Supplies and regional demands.  Shooting accessories and some hunting gear along with ballistic optics and eyewear.   Blackhawk gear from the Blackhawk Serpa and other Warrior Wear products will be in house in the Fall of 2011.   To setup an appoint call or email us by looking up the Contact us part of our website.

Top

Getting bored with your AR15?

It wasn’t until the later 1990’s that the M4 carbine really took hold in the civilian market.   We usually only saw the AR15 A2 on the firing line and that was about it.   Then we started to see the heavy barrels and then the light barrels.   In the last 6yrs there have been so many calibers and manufacturers making the AR15 firearms that I have completely given up on keeping track of them.   There are so many custom AR15 models that it’s really more like asking someone what kind of Legos do they like to build.

I am going to be taking the dive into the AR15 market again very soon.   I recently got to fire a Ruger 556 and was really amazed that Ruger of all people would step into the market, even more so than Smith & Wesson have the guts to make a 5.45×39 AR15 upper receivers.   CMMG makes a darn good version for the money and we’ve sold a ton of those to people that didn’t want to spend $1800 on another firearm.    Once again, the beauty of the AR15 design is that you can put any type of AR15 upper on them and only have a minimal amount of gunsmithing to do if something doesn’t fit quite right.

Top
1 2 Page 1 of 2