All posts tagged Butler Creek magazines

Is a 6.8 SPC worth getting?

That is a question we get quite often around here and we always throw a question back to a customer.   People call or show up wanting us to give them advice but there are a lot of liabilities in telling people what to get or do.   So much of gun accessories and firearms has to do with the job at hand and a persons gun skills.   I’ve heard people claim that you can’t shoot long range with a 5.56 gun but I see it done all the time at local gun clubs.   Sure there are instances of high wind where a 5.56 bullet isn’t going to do very well, but sometimes only a 50 bmg is going to get the job done.

Even the trusty and reliable Mini 14 is an often over looked hunting Carbine, but I’ve seen white tails taken up in Vermont with 75gr expanding rounds.   The 6.8SPC would be a more powerful round than what the military is using today but it’s not really going to solve all of your problems.  Most of my friends that own them are using them for hunting rounds and not even for Carbine training ect.  The only problem you may run into when changing uppers in with the gun magazines.  The 5.56 round is better than any handgun round if you use the right kind of ammunition and the AR15 platform gives you lots of caliber options that are really best for upgrading your gun for better hunting.

Top

10rd magazines for 1911s?

This is something I’ve only delved into once and it wasn’t a great experience.   Back in the early 1990’s we had all of that assault weapons ban BS and and aftermarket gun magazines were everywhere.   Some of us that owned certain firearms ended up with unreliable firearms that should have been durable.   $90 Glock magazines were not uncommon and $14.99 for a jamming Mini 14 30rd magazine from USA magazines, which I believe is been long out of existence.   Many people fell back on revolvers and there was a big upsurge back into the 1911 because it was one of those guns that was originally designed for fewer than 10rds which was what the Assault Weapons Ban limited you to.

So some of us messed around with aftermarket 10rd magazines and all of the ones I tried failed pretty quick.   We tried to make the 1911 into it’s highest capacity that we legally could, but the balance pretty much got messed up.   Gun magazines, even a few rounds bigger than standard capacity can make the gun imbalanced or make it harder holster.   There are a lot of reasons to use 10rd magazines like Wilson Combat magazines or Chip McCormick which have a good reputation in competition shooting, but they will protrude considerable.   This may cause snagging on shirts ect if you are considering using one for CCW.   If you’ve ever practiced with you’re gun, which you should have, firing 8rds and reloading is probable a better CCW than thinking a 10rd magazine is going to give you more protection.

Top

Magazines that aren’t flush fitting

I have never really liked the feel of having a pistol magazine protrude out of the bottom of the gun unless it is because the gun grip is too small for me.  I’ve seen a few of my friends do this on their Glocks, namely the Glock 26 because it is such a small gun.   I did put an extension on a Sig 239 which is the  only gun I currently own that has this.   The first gun that I owned was a Colt 1991A1 and it only came with one pistol magazine.   It was a Colt magazine which i thought would be the best gun magazine to have, but that turned out to not be true.   After having a few problems with the slide stop not catching, I found out the magazine tab was bending and causing the issue.

I believe it was at a gun show that I picked up 2 Wilson Combat magazines and my Colt 1991A1 ran flawlessly with ball ammo.  The gun magazines really ran well with hollow point ammunition but I found the gun to be too picky with hollow point ammo that I pretty much gave up on worrying about it.   If you look at the velocity that a 45acp is flying at, I don’t think you’ll have massive over penetration issues compared to 9mm ball.   Wilson combat magazines have varying base pads and from my experience this is mostly a concern for competition shooters.   If the magazine drops free I don’t need to worry about gripping it and pulling it out for a fast reload.

Top

The AWB is over, so buy Factory Mags

When I stopped and thought about writing this, I couldn’t believe how many years it has been since the AWB has expired.  It feels like it was just yesterday that I could get Glock or Sig Sauer magazines without having to spend $60-$90 for them.   Factory magazines are still more expensive than some of the other magazines out there, but they are always the best option for handguns.   There are plenty of decent manufacturers for AK or AR15 rifles, and most problems I have seen with AK mags can be fixed with a simple file to the tab on the mag wells.    I recently picked up a couple Glocks and XD handguns because I wanted to bring something to the next class I teach that wasn’t a Beretta, Sig Sauer or 1911.   Some people just have issues shooting 45acp and I didn’t own anything other than a Sig 220 and a 1911.

I have found the Springfield Armory XD 45acp to be the most comfortable 45acp gun to shoot that was not a steel gun.  I find the Glock 21 to be too bulky especially for my female students.   The factory gun magazines for my Glocks are less expensive than  Sig Factory magazines, but I have never had to replace anything on my Sigs other the springs.   Wolff Gun springs work very well in all of my rifle and pistols and I have stockpiles of them so that if I notice any slowness in cycling, I can just swap them out.   Rotating your gun magazines is a good way of making sure you don’t wear out the same magazine, because it’s a pain in the neck when you are trying to determine if the magazine is bad or if a shooter is limp wristing a firearm during a training session.

Top

The Sig 220 vs the 1911 enthusiast

There has been much debate about the 45acp use in handguns.   With the number of shootings I have seen where 9mm bullets were used, I’d have to say that the 9mm is definitely not a powerful round, but I have heard of bad guys taking multiple hits from an M4 that kept on coming, so there are many things that can come into play.   The 1911 has remained a popular gun and not because it is the most reliable weapon in 45acp.   I have come to the conclusion that the modern polymer guns are superior to metal guns as far as durability and reliability, but many of them do have crappy triggers.

When the Springfield XD first came out, it was a big deal for 1911 guys to find something that wasn’t a DA/SA handgun and didn’t have a sponge trigger like Glocks do.  You can get a lot of improvement in reliability with a 1911 with good gun magazines like Wilson Combat or Chip McCormick.  I have respect for Glocks, but they do have an odd feel to them and are not traditional.  The XD 45acp felt more natural to a 1911 enthusiast and brought them into the modern world.   The 1911 still has one of the best triggers, but it is not in the same category as some of the guns being made in 45acp these days.   I have several Sig 220 that have been extremely reliable, but Glock has an edge over them as far as endurace.

Top

.380 guns be realistic about what you are carrying

I think this past year may have been the year of the .380 pistol.   I don’t know exactly why everyone went with the .380 this year, but it was popular and considering the run on the ammunition and it’s lack of availability,  I think I should have purchased some stock in .380 and not just gold.   I recently attended a Taurus firearm event where the TCP .380 was being shown.   When I think of .380 guns I believe that up until this year, I could only think of the Sig Sauer 230 and the Sig 232 and the Walther PPK.  I have enough friends that like the look of the PPK but were not a fan of the gun due to the hammer bite.   If you have big hands that gun is most likely not for you.

The TCP was a little finicky about the ammo it ate, but I have shot several of the Rohrbaugh R9 pistols and they were also very picky about the ammo they ate.   When  you get down to those small semi-auto guns, you better put the range time in to know the limitations of the guns.   You won’t get a pocket pistol that will run for hundreds of rounds without needing to change springs or be lubricated.   Rotating your gun magazines is a must for smaller semi-autos. The .380 is also a very mild round and I witnessed first hand the lack of energy it had when shooting steel plates.  I watched a recent video where I heard 4 shots fired, one miss, 3 hits and the metal plate only fell one time.  Be realistic about the guns you are carrying and and why.

Top
Page 1 of 1