Revival of laser grips?

I think there really has been a change in attitude towards  using laser grips.    Now that police and military are actually being trained to use their weapons and every municipality has a better trained SWAT team than a decade ago, lasers are actually finding a place in the CCW and LEO communities.   When I first saw lasers coming onto the scene in the late 1990s many un trained LEOs got into situations where they would have normally pulled the trigger and taken the first shot, but the lasers slowed their shooting down because they were tracking the dot.

Instinctive shooting can’t be compromised, period.  When you are  in a defensive situation, you are more than likely within 9yds are less of your attacker and there is no need to even look at your sights let alone your laser dot.   Now that we have cleared that up, Crimson Trace laser grips has done a good job as a company of sending out a Free DVD that gives you some ideas on how to deploy a laser in defensive situations where it actually reduces your chances of being shot by helping  you stay under cover.

Top

Knock down power some range results

Sometimes ballistics testing can get too complicated and there are so many variables when it comes to testing a bullets performance that people really have to look at the results under realistic conditions and and realize that getting a hit is more important than which caliber, but when you compare hit to hit, there are differences in performances.    I’ve seen ballistic results where 9mm ball ammo was said to have hit with the same energy that a 45acp had, but I have seen multiple times that steel plates would not go down as frequently with 9mm ball ammo.   There were times when we heard  hits and nothing would drop.

Now that so many criminals are getting a hold of body armor, bullet penetration is coming more of an issue.   Even for those that are service over seas, 9mm ball ammo doesn’t penetrate a suicide bomber vest.  M855 is not very good for soft targets but against body armor it is.   We’ve been selling more Wilson Combat magazines to troops doing security detail because in their opinion 45acp worked better on soft targets and M855 was still necessary for penetration against suicide bombers and taking on cars.

Top

The SKS rifle, more accurate than the AK?

I’ve heard all of those stories about how inaccurate the AK is, but I’ve seen my fair share of 2 MOA guns that could hit out to 400yds very effectively if the shooter knew what they were doing.  Yesterday i witnessed 2 young adults nail targets out to 30oyds with an SKS rifle that was zeroed in at 200yds.   I would say that if they had optics that gave them a bullet compensator then they probable could have been effective out another 150yds.   The real problem with the SKS rifle is that it doesn’t really hold it’s zero once the mount is removed.   I would never recommend skipping cleaning the rifle because it does have a flaw in the design and there are some safety issues.

The SKS is a fine blasting and plinking rifle and although the range is limited by the 7.62×39 ballistics, it can be a step up into the semi-auto world for a novice shooter.   I’ve heard that the SKS was used as a sniper rifle in the Vietnam war, and although it’s not a great gun for that, with good ammunition, 2 MOA means  being capable of getting a head shot at 400yds if the shooter knows what they were doing.  We hauled a few of these around in soft gun cases, and they fit into a gun sock that I have left over from a Remington 870.   The SKS has a fixed magazine and with stripper clips, it feeds and reloads quickly.

Top

Magnification and sending long distance phone calls

Ok, that was a dumb thing to say, but I still chuckle at one of my buddies comments whenever we’re on the long range.   Reaching out and touching someone at 600yds is precisely what a sniper does.  I have learned to notice that clarity of rifle optics but one thing that is becoming more and more of an experience is looking through all of the optics out there and their reticles.   A long time ago, people were more concerned with the durability of the optic and making sure it wasn’t going to fog up on them when they took the scope caps off in the early morning when they went out chasing whitetails.  Now some of your least expensive rifle optics don’t fog up.

I have a few Zeiss Conquest scopes that I’m quiet happy with, but I think I could go with less magnification on some of them.   When  you are trying to hit a 6ft target at 600yds, it’s really not that hard to see it.   When people try and see an X on a 2ft piece of paper in their rifle scopes, that’s a whole other thing and in my opinion something not worth pursuing.   I have walked off shooting ranges in the summer time because the mirage given off from the  heat was so bad that it was completely impossible for me to even see a target at 100yds and testing my hand loaded ammunition would have been a waste.

Top

Transporting the 1927 Thompson

I recently attended a World War II gun club event and had a lot of fun being there.    I have always know what I liked from the WWII era, but I never really jumped on the collectors bandwagon because most of the guns are in my humble opinion, collectors items.    Many of the bolt action rifles that were used during the war are chambered in .303, 8mm and 30/06 and still have a place in the hunting community, but for home defense or modern combat, those calibers are not very common and there aren’t very many gun chambered in them anymore.   Finding ammunition is very hard and with todays inflated prices, it’s very much a collector thing.

The M1 Garand is a great and powerful for it’s time, but the function of it is very dated.   Having 8rds of 30/06 in a semi auto that is capable of hitting targets out to 600yds easily is far more than what the average deer hunter is going to need.   The M1 Carbine would probable be my favorite if the caliber wasn’t so hard to get and there were more bullet designs that could be applied for defensive purposes.   The M1 Carbine is more powerful than .357 magnum, but the gun is designed for FMJ and would urge against them for home defense.   My favorite is still the Thompson 1927 which can be toted around in gun cases that look like a violin case and will get a lot of laughs when you show up at the range.   The 45acp gun is very reliable and will shoot many defensive rounds.   The 45acp you get out of this gun is a powerful close range weapon.

Top

Flush fitting 1911 magazines

I am pretty much stuck on Wilson Combat magazines for my 1911s but I am aware that not everyone likes the way they are extended on the base pads.   I am also not an IDPA guy, but I’ve attended a lot of events and I don’t really see much more than Wilson and Chip McCormick being used.    The Chip McCormick magazines from what I have seen are pretty much a toss up when it becomes a relibility question between Wilson combat magazines and them.   There are several things to keep in consideration with each magazine you try.

The first thing I want is reliability,  I would have to say that I’d try 3  magazines with a manufacturer and rotate through about 250 rds and then declare them to work.   The second thing I want from a magazine is for it to drop free.  Giving the number of gun manufacturers out there I wouldn’t claim that Wilson Combat magazines are always going to drop free for you, but I find them to be the best in these regards.   The extended base pads can come in useful if you want extra grip on the magazine when removing it, but I don’t really notice that.   If I was shooting a short 1911 gun, I might notice the lack of flush fitting more.   My Sig 239 is a great CCW gun but if I had anything that wasn’t flush fitting for that I would probable not like shooting it.

Top

Getting the most out of the .223 gun

Even if you are someone that get’s very accurate results from your M4 or 14.7 inch barrel AR15.   You may be getting hits, but that caliber can become very weak once you get several hundred yards out.   When I picked up a chronograph I was blown away by how much velocity I actually got out of short barrel handguns and my M4 rifles because it did not match up with what I previously read about on the internet.   I saw 75gr HPBT clock at 2900fps out of my guns when I thought they would have been close to 2750.   I know you can push the limits with hand loaded ammunition, but you do have to be careful about excessive wear and tear.

I have been recently thinking about picking up an LWRCI Repr because I have been a big fan of battle rifles and even the military has brought back the 7.62 DMR rifle in various configurations.  I have even seen a few British troops show up with FAL rifles with scopes on them.   There is also a difference between what you can get out of a 55gr hpbt and a 75gr hpbt out of a 5.56 gun.  Sometimes an 18-20 inch AR15 upper receivers will get you far more range and punch than M193 ball ammo.  What you can do at 400-800yds with those guns compared to a 55gr bullet is considerable especially with wind drift ect.   Of course much of this is up to the skill level of the shooter.

Top

Extensive gun cleaning and gun supplies

I recently did a walk through at a Dick’s Sporting goods store and I was recently at a Cabela’s here in Pennsylvania.   The gun cleaning kits that I had when I first got my own rifle are still being made, but I just don’t have the urge to give something like that as a Holiday present to family members.  I’m not sure exactly what is going on, but I have so many family members getting their first firearms and it’s been a lot of fun getting them setup with targets, joining gun clubs and helping them take apart and clean the guns.  It’s also been a learning experience because I  didn’t know how to do everything until I did a little research.

I still highly recommend that people have atleast one strong one piece cleaning rod for a rifle or handgun around, but that is only for clearing any bore obstructions.  Boresnakes are the easiest thing for a new shooter to use because not everyone has young eyesight and can see clearly inside the gun to know that everything has been cleaned.  For anyone getting an AR15 or knowing someone getting an AR, the Otis gun cleaning kits are probable the best gift you can give them.    Make sure you get the M16 kit because it has special brushes and tools to get into areas that a cleaning rod just won’t touch.

Top

Lasers and Flashlights the key is to know when to turn them off

I did a demonstration with one of my friends how using night vision and IR was really easy to pick up from a counter sniper situation if you were projecting it from the same location.   For instance, if you have night owl night vision which is pretty good for the money, the IR is located right above the objective lense.   If you had something like that mounted on a rifle scope and someone who had the same nightvision, but didn’t turn there IR on, they could find you as easily as you would have if you turned on a flashlight in the night.   The best way to aid a sniper in combat is to project IR from above and not directly from a rifle.  The point of this is just because you can do something with an accessory on a firearm doesn’t mean it’s really going to give you the edge.  You have to know how to deploy it.

I never thought just slapping a laser on my AR15 would be fun, I always thought it was kind of pointless because a laser is virtually a perfect beam of light, but a bullets trajectory changes very fast and the laser is about as good as a red dot or rifle scopes in all practicality.   Flashlights are a good thing to have around or on your firearm in your home, but if you are going to use it offensively and not defensively, you have to deploy  tactics that hide movement and don’t give your direction of movement away.   If you are in  your house and hiding in your bedroom ect.  In 99% of situations, yelling down the stairs that you have a gun and you are going to blow their head off if they come up will stop a threat being able to identify something in a corner like a burglar in hiding is what your flashlight it for.

Top

Eotac Style 203 vs Style 201 pants

In the early part of 2011 I’m going to do more research and pick up a few more lightweight pants.   I know 5.11 has a lightweight pants that is 65&/35& poly cotton pant.   I have never had issues with my pants holding water, but then again I have never been deployed to Afghanistan and never noticed the difference between the two.   The 5.11 taclite pro pant is something I will pick up, but I gotta drive around and check them out at other dealers before I do so.   I’ve had too many sizing issues between various companies to be able to just order stuff online.

The Eotac style 203 pants do have an edge over the similarly designed Woolrich Elite pants as far as my opinion about the pocket designs, but some people have different bodies and prefer the larger seated cut on the Woolrich Elite.   If I was heavier, I might not like the close fitting that the Eotac pants have.   The only thing I am not very fond of on the Style 201 tactical pants is that the stitching on the lower ankle pockets has a few sharp spots on the insides and every once in awhile I get a small jab in my ankle by a something that feels like it’s pulling a hair out of my leg.   If I wear long socks the issue goes away, but in the summer you can feel it.

Top
1 … 132 133 134 135 136 … 194 Page 134 of 194