Boresnakes and gun cleaning kits for the AR15

I’m really starting to accumulate a lot of gun cleaning accessories in recent  years.   Not that I really felt I needed them, but I was wanted to know if they were useful and helped speed up or simplify the process.   Every firearm I own needs to be cleaned in a different manor.   I am very careful how I clean my Russian SKS rifles because I have seen on several occasion that using the wrong cleaning liquids like WD40 can actually cause the gun to double or go full auto.  Bolt action rifles are in another category because you really could get away with mostly just using gun oil or a rust inhibitor.

I have several AR15 rifles and I like shooting all of them, but when it comes to cleaning, It doesn’t matter what cleaning tools I have, my LWRCI M6A2 is my favorite to clean.   I don’t need to clean the LWRCI upper receivers pistol area more less than once every 2500 rds and there is absolutely no need for using a scraping tool inside the locking lugs or the bolt carrier like my direct impingement guns.  Depending on what type of AR15 fits your needs the LWRCI gun may cost you 30-50% more than a less expensive gun, but there are hobby guns and there are combat carbines. And you get what you pay for.  How about accuracy, reliability and easy cleaning?

Top

Tactical vests and firearm retention

Gun vests are as diverse in application and gun holsters are.   There are various types of vests for specific missions and some of the best ones to get are the ones that you can configure yourself.   Not everyone needs to carry 12 gun magazines for their M4 Carbine and most of that would even be considered extreme for a combat soldier.   I am a big fan of leg holsters because my primary fighting weapon is an M4 rifle and I don’t like the idea of putting a handgun up on my vest because it’s one more thing for my rifle sling to snag on.   Eotac and Woolrich Elite vests suit me better because they are softer and don’t have a holster for retaining a firearm, it’s all magazine and gear and the pistol magazine holder is inside the pockets, not outer pouches.

I am also not a fan of vests that carry tons of rifle and pistol ammunition, it’s good to be able to carry a backup handgun incase your primary goes down, but I’m more inclined to bring a spare bolt and firing pin so I can replace most broken parts on my M4 in only a minute.   Having 2 or 3 Wilson combat magazines for my 1911 is all I need for most practical purposes.  If I need more handgun ammunition than that, I might as well pack a few grenades and be able to call in an airstrike, too.  If you are wearing a tactical vests, in my opinion, it’s cross draw, or it’s a leg holster for your handgun.

Top

Gun cases for the gun enthusiasts

If you are new to collecting firearms, I have some advice for you.   Keep your guns, ammunition, magazines and accessories organized.   This may even mean that you have to spend money on gun safes or gun racks, but considering how much damage can occur to your firearms and especially rifle scopes, good organization means preservation.    I have on many occasions seen guy show up with rifles and bring the wrong gun magazines or the wrong sight in tools and from my experience, all of that should be in a range or gun bag at all times.   It’s better to keep everything in one place and bring it all with you then having to worry about if you have your AK sight in tool, M1 Garand sight in tool or your AR front sight adjustment.

If you have several long guns,  consider buying the same type of gun cases and write on them which gun case if for which rifle.   It can be a real headache if you are constantly trying to remember which gun is in which case and if the assault rifle case is for a Mini 14 or an AK.   If you own both guns, get 2 gun cases.   Allen gun cases are very inexpensive and for the most part, once you know the length of your firearm you should know if it will fit in the case.  High mounted optics or flashlights can make it problematic on knowing if a gun case will work.   The Endura pistol rug is easy to file away and can also be easily written on or marked.

Top

Keeping it simple, but still wash your hands

I’ve often found it difficult to clean my firearms while wearing gloves, this gets right back to the problem that I have often come across when handing the AR15 rifle with them on.  There are smaller parts to take apart on the M4 Carbine and even though I have to get my hands dirty, I can’t get to all of the parts with gloves on.   There have been times I only fired less than 20rds through a rifle and I wasn’t in the mood for a full firearm disassemble.   If I have a firearm that has gone on a camping trip like my Marlin 336 lever action or a Winchester Model 70 bolt action, I still clean them after every trip even if they have not been fired.   Moisture can get to these types of firearms and I have had many wars with rust in the past.

There are traditional cleaning kits that may work for you, but since I have bent rods cleaning firearms, I strongly recommend against anything but a once piece rifle cleaning rod to prevent damage or issues.   Boresnakes will speed up the process of cleaning your bore and avoid the problems of putting cleaning patches, but you still need to use lube and wash them on occasion.   Otis gun cleaning kits can fit in a rifle stock, your pistol grip or your butt stock depending on how many tools you think you want to store there.

Top

Ankle holsters and gun weight

This is something I have never been able to get away from, if a gun is heavy, you’ll eventually start to feel it.   I hear guys constantly brag about how they carry a 1911 or a full size Springfield XD 45acp in a holster all day, but when I start to question how much of the day, days of the week, and how much physical work they do when carrying, the answer is always less than what it seems.   I have said many times that I have often been amazed by some of my fiercest and most knowledgeable friends are packing some of the smaller firearms and they are confident.   A J-frame 38 special can be had in a lightweight frame and that gives it more versatility compared to a heavier frame.

Ankle holsters are not for everyone, if you aren’t in good physical shape this isn’t for you, from my experience this is a wedding or backup carry method.   One thing to consider with Galco holsters or similar types of holsters is how much weight can you comfortable handle.   You have to watch the type of pants you wear so they don’t bunch up, and expecting to carry a heavy firearm in this manor and be able to walk around without feeling like you have a ball and chain wrapped around you is something that foresight is needed.

Top

Otis butt stock cleaning kit

The first time I ever got a hold of an Otis gun cleaning kit I was kinda overwhelmed with the amount of brushes and tools that were in it.   It was a universal rifle and pistol cleaning kit and I was kind of bothered by how much stuff was jiggling around inside the pouch.   I know now that this was a little more than what I really needed, but once I figured out how to use the kit and what all of the tools were for all of the other cleaning kits from Otis were easier to use.   This is from someone that started out with a bolt action 22LR rifle and a Hoppes gun cleaning kit from K-Mart.

The gun cleaning that I have grown to hate usually is from the AR15 direct impingement guns I own.   I have heard numerous firearms instructors tell me that there is such a thing as too much cleaning, and knowing exactly what parts to lube and clean on an AR15 is the key to firearm maintenance.   The Otis gun cleaning kits I use now are specific to the firearm I am cleaning. Hoppes boresnakes have served me well, but getting into the parts of an AR15 especially the locking lugs is difficult without an AR15 brush designed for that type of chamber.  There are times you will need to literally scrape the locking lugs of an AR15 and Otis has the tools and gun cleaning kit for your needs.

Top

Gun alterations make affect your holster

There are now so many things you can do to a firearm that you better be real careful that you think things through before you find out at the wrong time that  your guns and gear don’t match up very well.  One of the most common problems I am starting to see on the firing line while watching defensive weapons training with handguns is this.   Operator replaces the front sight on his handgun to a slightly higher version, gun fits in holster.   When the operator walks onto a firearm line and tries to quickly pull the firearm out, the front sight snags on the holster on the way out and the gun spins forward out of the operators hand, and then flies forward.

The obvious issue with gun holsters is adding on laser grips, something like the Crimson Trace Laser grips may mean tweaking your holster or having to buy a new one, be real careful about the gun sights though.  Many holsters don’t give you the specs on what kind of sights it will tolerate and this is something you’ll have to do on your own.   Lasermax laser grips will not be an issue due to the fact that there is nothing protruding out

Top

Kahr firearms and .380 pistols

I remember the first time I ever shot a .380 pistol and it was an NAA Guardian gun.   They seemed so small that my initial impression was it was just a step up from a fly swatter.   I’ve done some not so scientific ballistics tests on metal fence posts and saw the penetration differences between a .38 Special and a 9mm, and there is a substantial difference between those calibers and penetration.  The .380 is practically a 38 Special short and people need to be realistic when they want to consider what a firearm engagement will be with a pocket pistol such as this.   Worrying about accuracy ans sights on this gun IMHO is pointless because this is the type of firearm that will only stop a threat if it’s put into the main reactor of the Death Star or  you unload the whole  thing and hope the bad guy isn’t wearing body armor.

I have shot a lot of Kahr firearms and I think the 9mm pistols are very well made and I see no reason to change the caliber to a smaller one when the 9mm already fit in your pocket.   Kahr magazines are what you want to use in the gun and I would not compromise on this issue with a concealed carry firearm.  There is  nothing wrong with having range magazines so you don’t wear out your primaries, but it’s mostly only with 1911 firearms would I stray from factory magazines.   If you have a semi-auto that holds 5-7rds and can carry a backup magazine,  and you’ve done some training, you should be good to go.

Top

The 6.8 SPC still not catching on

I was never a big fan of the .223 or 556 caliber until I actually got off the bench and started doing real gun fighting.   I started out like many, with a Russian AK variant which was extremely reliable, but when it came to target engagements out to 400 meters and for close quarters gun fighting, there was a substantial difference in hit ratio.  Hit ratio was something that I never dealt with before because it was all about penetration and accuracy.   Now I know that being able to shoot a reliable rifle doesn’t mean you are going to win a fight, it’s all about hits and who gets the hits first.

There have been times when an AK74 type of rifle has done almost as well or equal to an M4 Carbine, but the shooter has to have more experience in gun  handling skills to keep up.  I compared the close quarters hit ration of the 6.8 SPC and found it to be closer to a 7.62×39 AK than a .223 variant. CMMG upper receivers are something to be considered if you are looking to mess around with bullet calibers.  Muzzle hop or flip will affect  your accuracy and speed and that is something to be concerned about.  Room to room and house to house fighting is something which occurs in seconds and putting 5 hits on paper is better more reliable at stopping a threat than one bad hit.   Bullet penetration is also something that can be over blown when it comes to CQC because that is a bad thing in a hostage situation.

Top

Getting into a good firing position

There are plenty of times that I have wondered why  certain people even bothered to spend so much money on firearms when they were afraid to get them dirty or wet.  There is nothing wrong with being a bench rest shooter because that in itself is a skill of it’s own.   Some people don’t realize how much talent it takes to make a bullet, and the hard thing to do is make multiple bullets hit the same impact point.   I have moved away from bench rest shooting because I’ve found my accurate loads for most of the 45acp, .308, .303 and 30/06 loads I shoot.  If you really want to become proficient, you really have think about getting off the bench.  Using a rifle sling is important, but it’s not the only option.

Serious tactical shooting skills will require you to get off a bench rest, but learn how to make your own in the field.  I have a few good shooting mats that work as rifle cases and they can unzip and fold out to be shooting mats.   I suggest getting a good backpack that can act as a shooting rest and if you learn to get yourself into good physical condition and be able to move your body, you should be able to stay in the position and shoot accurately.   The US Peace keeper shooting mat is 72″ long and 36″ wide and will give you something to lay on other than mud and dirt.

Top
1 … 129 130 131 132 133 … 194 Page 131 of 194