All posts in Magazines

The importance of drop free magazines

You need to test your gear and accessories out to know for sure that they work on your firearms because there are so many variables in manufacturing that even the same company can slightly alter a mag well or magazine.   There use to be enormous problems with some AK magazines because not all Communist block countries made them the same.  I had a friend that picked up about 20 AK mags at a gun show and thought he’d stock up on them, only to find out that he had to take a file to most of them because they wouldn’t lock up in the rifles.

When it comes to handguns, the biggest problem that can occur once you get away from Factory magazines for a 1911 are that they don’t drop free.   1911 guns are not know for being very tight when it comes to tolerances and they are for the most part drop in guns.   Wilson Combat magazines are very sleek and are the number one magazine I see at IDPA competitions.   I have 5 1911 handguns all from different companies and Wilsons 7rd and  8 rd are all I ever use.  I think  the guns look better with flush fitting magazines, but reliability is the most important.

Top

Been playing with my 1911

No that is not a joke about something else,  but I have been shooting Glocks almost exclusively over the last year and it’s nice to go back to what I really love and have fun and not have to deal with the high paced tactical shooting programs that I have often had to deal with.   The 1911 still is King at the IDPA courses and that’s not going to change anytime soon.   There is something really addictive about the thunk of a 45acp round exiting a firearm and it’s not just the design, it’s the power that you can feel.   I will leave the ballistics debates up to the gun boards, but for knocking down steel targets, the 1911 is the ruler target drops.

I recently watched a video from Magpul Industries and Travis Haley mentioned that he did door knocking with a 1911 and actually used it in combat.   I’ve switched up to Chip McCormick magazines lately just to see if they are as reliable as the Wilsons Combat magazines that I have used for so many years. I just think its good to brush up on the #1 close up fighting pistol that so many Special Operations guys use.   The 1911 is still going strong in the military and the magazines and improvements have made it far more reliable than the original design.

Top

Often over looked firearms

There is much to say for using an M4 Carbine for home defense in comparison to using a handgun.   There are many people that are transitioning home defense weapons from handguns to carbines.   There are  pistol caliber carbines that have very good reputations for reliability and given that you are getting another 200-300 fps or more out of them from a handgun round, you are getting more punch and spank from your bullet.   One firearm that is starting to get a little more use due to ballistic improvements in ammunition is the M1 Carbine.

The M1 Carbine always had a good reputation for being reliable, lethal and handy.   The Mini  14 from Ruger has a bit of an edge over the old M1 Carbine, but it’s still a very potent and useful weapon.   When we are asked about gun magazines for this firearm for  home defense, especially in California, New Jersey and the un friendly States, Promag magazines makes a very good M1 Carbine 10rd magazine.   This is one of the best replacement magazines you can find for the M1 Carbine and if you look around there are some decent defensive rounds you can optain for this caliber.

Top

Did the M14 replace the Garand?

That is a sure thing, and in my opinion it was a big step forward for semi-autos.  It really is too bad the gun was not fielded during the Korean War because it would have made a difference for the USGI.   As much as the Garand was a useful weapon to the American Rifleman, it was quickly out dated in the battle field and from what I have personally witnessed, is not very versatile when it comes to being used by different soldiers.   Many Vets that I have spoken to did not think the gun was fun to shoot and couldn’t hit anything at 100yds with it.   I’ve seen that type of shooting before, it’s called “fear of recoil”.

When the M14 was first issued, it pretty much did in the M1 Garand and the BAR, but modern warfare made the riflemen’s  usual combat engagements take place at well under 400yds.   Most engagements that I know of from personal stories took place at under 100yds.   The M1 Carbine still was very practical for soldiers until the M4 Carbine came out, now many enthusiasts in California and New Jersey can use the Promag magazines that are 10rds and from what many of our customers have said they worked very well for this old relic.   If it were not for the limited availability and reliability of M1 Carbine ammo, I think the gun would be more popular.

Top

Ruger Mini 30…what’s the point of having one of these?

That’s a far out dated question is  my opinion.   Sure you can get an SKS or an AK for less money and higher capacities, but for the most part, the AK and SKS are not very friendly to mounting rifle optics and given it’s tradition scope ring mounts, you can mount a nice Leupold rifle scope on the gun and get more out of it than you would from a surplus Com-block rifle.   Can I also say that the gun is lighter and has a better trigger?   There are certain products that we sell that are sold to many of our customers in California and New Jersey and can’t use gun magazines that usually are standard issue.

I got an incredible deal on a used Ruger Mini 30 for just about $200 from a disgruntled owner that tried to make the gun into something that it wasn’t.   Promag magazines makes a reliable 10rd magazine that worked for me.  I have no interest in trying to make this gun take 30rd magazines.   There are now domestically manufactured brass hunting rounds for the 7.62×39 and I wouldn’t hesitate to tell someone to consider one of these Ruger puppies for yard work.  I also wouldn’t hesitate to consider reloading for your Mini 30 because you should  be able to get your gun to pretty close to MOA with the right ammo.

Top

Uploading magazines, single stack and double stack

I use to upload all of my guns until a bad experience occurred to me with several of my gun safe firearms.   I mostly buy used firearms and my Sig 229 in .357 sat in a gun safe loaded with 12+1.   I bought the gun  used and replaced all of the magazine springs with Wolff gun springs, did a range test, and then when the gun passed the range report, I loaded it up and put it away in the safe for 9 months.  Thinking that taking this gun to an IDPA match would be a good way of testing it out and making sure it was reliable, I just took it with me and give it a run.

I had another Sig 229 with me, but this was in 40 S&W and it was also loaded to capacity.   Needless to say, both guns failed on me.   I  have a Colt 1911 with 8+1 rounds of 45acp in a Wilson Combat magazine and it has never failed me.   The only problem I have with it is that I need to really make sure the magazine is seat properly because it barely clicks in.   All magazines have been downloaded by at least 1 rd and since then, all of the guns have passed range tests even after long term storage.  Be careful about what you read on the internet, uploading many guns for long periods of time will decrease reliability.

Top

Sig 220 vs the 1911

I think there is just something about a 45acp that really makes firearms manufacturers do it right.  There is always preference when it comes to which firearm you want, and due to modern technology, many firearms are very reliable under almost all conditions.   The arguments about which caliber handgun has more stopping power will probable be a non-issue in coming years due to less lethal weapons like tasers ect.

I can’t think of any 45acp gun that is a full size semi-auto that I don’t like like.   The Springfield XD seems to be the most popular 45acp amongst 45acp enthusiasts.  Mostly because it feels closer to a 1911 and it is very well balanced.  Wilson Combat Magazines give the 1911 more reliability, but unless you do some alterations to the throat of the barrel, it won’t tolerate as much ammunition as the Sig 220 or the Springfield XD.

 

Top

A debate about guns, caliber and concealment

I’m mentioned many times before that I have witnessed many CCW holders go from full size autos to j-frame revolvers and I don’t think they are under gunned at all.   Many of my friends are now carrying  .380 pistols and 38 Specials.    If you are not on a hit list and not a LEO, you are more than likely  only going to deal with a minimal number of threats to your life and if you train to use  your firearm properly, you should be able to take out 1 or 2 bad guys with any firearm.   I’m not going to guarantee it, but having 2.5rds per target should make a 5 shot S&W worth it’s weight in gold.

I’m also not going to argue with someone that wants to carry a full size 1911 with a 7rd magazine.  I personally have never had a problem with my Wilson Combat Magazines, whether they are 7rd or 8rd.   I’ve heard many debates that the 8rd magazines are not as reliable, but I have never used anything but the 8rd magazines and I don’t have issues.   The real advantage of the 1911 design for CCW is that it is very thin.   I would say that my 8rd Sig 239 is actually thicker in the frame than a 45acp 1911 and it is easily concealed IWB.

Top

Magpul Pmags, testing reliability after you run it over with a truck!

I often refer to some really good AR15 magazine tests online where guys have posting information on YouTube  and other places of how durable these Magpul PMAGs are.   I’m still waiting for someone to start making gun magazines like this for handguns, and I’m sure that will happen someday, it’s only a matter of time.   I was never a big fan of the AR15 gun because I’ve seen so many of them jam on firing ranges, but that was almost 12yrs ago and I think the AR15 is  now an outstanding firearm if you are using PMAGs.  We’ve shipped so many of them to law enforcement that are using them and now many active military use them.

There are a few variations of the PMAGs and I have only ever heard of one recall on them, but as far as I know, there haven’t many very many changes in them.   There was a very slight change recently, but not a huge one.   There is no reason to keep your GI Mags in your firearm when Magpul PMAGS have been on the playing field long enough to know they are worth their weight in gold. There are things  you can do to the magazines to get them to fit your needs like putting mag assists on the bottom of them.  These can be had in the rubber removable kind or by removing the floor plate and putting the range floor plates on them.  Be advised that these will cause the magazines to protrude and you have to make sure your mag pouches will work with this.

Top

Tactical holsters for secondary firearms

One of the first holsters I ever purchased that was not specifically for concealed carry was an Uncle Mike’s gun holster.   It had a metal clip that that was very secure on a belt, and it was made of nylon.   It worked very well for me for several training sessions and it had a front pocket that could hold a double or single stack magazine with a velcro strap to secure it.   I never had a real problem with the holster since it is made of nylon and isn’t as harsh to lay down on as a paddle holster.  Many paddle holsters aren’t going to tolerate roll overs.

I have thought long and hard about what type of handgun to have with me as a secondary firearm and the thought came to me that it really should be all about up and close fighting and then flee the situation and clear my primary and get back into the fight with that.   I don’t carry about caliber wars between 9mm and 45acp, I will gladly fight a handgun battle with an M4 Carbine.   My secondary firearm is a  fitted with Wilson Combat magazines for a Colt 1991A1.   I carry one mag in the gun, and 2 in a vest pocket.   I don’t think over loading myself with handgun ammo is a good thing and 24rds of 45acp is good enough for me to fight my way out of a situation.

Top
1 … 12 13 14 15 16 … 22 Page 14 of 22