All posts in M4 Carbine Parts

Ruger 10/22 range day and scope options

I’m brainstorming with this blog post so give me some of your advice if you have any on what to put on my Ruger 10/22 rifle.   This is a standard 10/22 and not a tricked out barrel or trigger.   I purchased all of my 22lr for new shooters to learn on and didn’t want to get too fancy with optics in the beginning.   After picking up a Marlin Model 980 bolt action and having the rear sight replaced with an adjustable elevation like the standard 10/22,  I haven’t had the urge to buy another optic for this gun.   Many bolt actions are capable of shooting quarter size groups at 100yds with the right kind of ammo, but even though my bolt action has that capability, I still wanted it for novice introduction to firearms.

My ruger 10/22 was a training gun, but after recently doing some aggressive testing between the two, there was no comparison in accuracy.   The bolt action was shooting dime size groups at 50ft and the Ruger was shooting 2 inch groups with the same ammo.   I’m thinking about picking up a rifle scope for this gun that is either a fixed power or a red dot.   I have a Butler Creek 25 round magazine that I have yet to test out, but it could be a good close quarters combat training tool for wiping out soda cans and other carbonated reactive targets.   I had an Eotech 552 on a Ruger Mini 14 and had fun with it, but went back to a 3-9x40mm scope because it just seemed more practical.

Top

Magpul DVD review

I am almost all the way through the entire Magpul DVD collection.    After several years of being on the firing range as a student and an instructor, I have often been asked if I know about any good DVDs for training.   I started out watching The Art of the tactical Carbine Volume I over a year ago and finished off Volume II about 6 months ago.   I thought the volume of info and the length of the DVDs to be very well worth the amount of money I spent, I was really impressed with how much time there was.    I would recommend these DVDs to beginners even though I do not think they are novice level training.  There are some basics in this, but the application of advanced basics is in there.

The Magpul Aerial Platform DVD was in my opinion more for the History Channel than it was for the gun owner, but I would get this one last over the other three Volumes.     The Art of the dynamic handgun is by far the best bang for the buck.   Clint Smith has some very well produced DVDS but they were expensive and I thought they could have been more informative.   I give them to family members that are new to firearms, but the Magpul dvds were in my opinion a step up.   I haven’t been to Thunder Ranch, but I intend to do so some day due to it’s great reputation, but I think The folks at Magpul owe me some more defensive training DVDs.

Top

5.11 tactical jeans review pt 1

I finally did my rounds and checked out a few local 5.11 dealers to see what they had in stock.    Something I always find annoying about stopping in these places is how much of a mess the clothing usually is.   I always have to dig around for my sizes and rarely do any of these gun shops or police and security stores keep there crap together.   The other thing that I find annoying is that so many of them clear out certain styles of clothing during the year like there is a non-season for polos and jeans.   Some of these tactical clothing manufacturers are running huge shortages and various products are out of stock for 6-9 months at a time.   I actually noticed many of the gun shops in my neck of the woods stopped selling 5.11 tactical pants because it was too much of a headache for them to deal with.

It was time to restock my tactical pants inventory and I’m not prone to sticking to only one manufacturer.   I have worn 5.11 tactical pants, Eotac, Woolrich Elite and even SigTac.   Each tactical clothing company and tactical gear manufacturer has it’s pros and cons,  but I’d give Eotac and Woolrich Elite the edge on quality control.     I am comparing the Eotac 205 concealed carry jeans to the 5.11 jeans and there is no comparison.   I feel a difference in the movement of each jean, but I really don’t think I feel restricted in any way.   They are both well made, but there are huge differences in the designs.   The Eotac jeans are very similar to the Woolrich Elite Discreet MKII pants, but they are definitely not the same.   The 5.11 jeans are what I’d call more for deep concealment.   There are internal pockets that can hold a j-frame revolver or a small semi-auto and a few spare magazines.   I find the pockets to be a  little too deep and don’t really like the fact the guns are practically inside the pants.   I tried putting a Sig 239 in the pockets with spare magazines and it was extremely uncomfortable when sitting down, so I would have to say you need something smaller than that.

Top

Bans on gun stocks and accessories

I feel sorry for some of the people that are gun owners and are presently stepping into the word of AR15, AK or Mini 14 ownership for the first time and live in anti-gun States.  I have had some really bizarre conversations with friends in California and New Jersey that had to take AR15 or FAL gun magazines and have blocks welded into them so they couldn’t take more than 10rds.  To some people these sounds like a good thing, but the real problem is  you are taking something that is functional at a certain operating system and potentially messing the whole thing up.  Magazine capacity restrictions are like putting smaller gas tanks on cars to keep people from speeding.   The other problems that many in New Jersey or California and other States run into are gun accessories like flash hiders or folding stocks, these are all usually banned.

I find the whole issue about bans on gun accessories like bayonets and folding stocks to basically be about people trying to put band aids on your kids body parts where there is no bleeding expecting to stop another person from beating him or her up.    Nobody wants to talk about how most gun crime is from the drug trade which basically is a self inflicted problem due to our Federal Government getting involved.    Gun accessories like, bayonets, flash hiders, folding stocks,  collapsing rifle stocks have no bearing on reducing crime and putting people who are a threat to society in jail for long periods of time would have more impact on reducing crime than making law abiding citizens block 20rd magazines so they can only hold 10.

Top

Road trips and cleaning firearms

I was never one to jump on the bandwagon that it should  be necessary for someone in the military to break their M16 down every day and clean it.   I always thought that if the gun needed that much attention, they really should think about a new design.   The real reason the military does this for many soldiers is basically to keep everyone occupied and give them something to do.   I don’t think even an M16 needs to be cleaned more than 2 or 3 times a week, even in dirty conditions.   I’m sure that it some situations you are better off keeping  your chamber hatch closed and not opening to clean it when the air is full of sand and will just attach itself to the gun lube on your  bolt.   We sell a lot of Otis gun cleaning kits to the military for a reason though.   Everything you could want to clean a pistol or rifle is in a small compact case.

I personally find using rifle cleaning rods to be easier and for some reason I feel like I am getting a thorough cleaning.   Bore snakes work very well, but I have found them to become real messy to use if they are being used often.   You have to put them back in the clear case they came with and sometimes I feel it’s easier and cleaner to toss out dirty cleaning patches instead of putting the filthy boresnake back in it’s patch.   Bore snakes are easy to clean if you want to toss them in a wash machine, but this isn’t practical if you are on a road trip.   Otis gun cleaning kits, depending on which you purchase, should have just about every tool and brush you need to clean your firearm.   I did jam a patch in a rifle once and i did have to resort to using a cleaning rod to unjam it, but after I got the right method for “taking a pinch on the patch” and not using too much of it for a smaller caliber, I got the job done.   Otis has plenty of videos you can watch before you buy a cleaning kit if you think the kits are a little overwhelming.

Top

5.45×39 upper receiver options

I recently got to witness the Smith & Wesson 5.45×39 in action a zombie shoot competition.   This upper has been on the market for a few years, but in all honesty I don’t know anyone that has actually put one to hard use.   I always thought that the direct impingement design didn’t lend itself very well to Russian ammo.  Many AR15 jam up and do not work very well with Wolf ammo and from my experience there are more FTF when mixing Russian ammo with American guns.    Not only do many of these guns fail to fire, the ammo is ditier and can cause failures to extract.  Sure you can always get around some of these issues by constantly cleaning,  but I wouldn’t expect my AR15 to be combat reliable with Russian ammo, especially when the round count gets up there.   We’ve sold a great many upper receivers in the 2010 and the Smith & Wesson 5.45×39 is the number one seller.

Smith & Wesson 556 guns were one of the best made guns in 2009 and many of my fellow firearms instructors will testify to this.   Even though there are still some issues with the DI type guns, the guns being made today are superior to the AR15 DI guns from 10yrs ago.   LWRCI has their own short stroke piston upper receivers in 5.45×39 , but from what I have seen in the firearms market, I don’t jump on the bandwagon with new guns until they’ve been out in the field for several years.   I saw changes to firearms from Rugers LCP and LCR  and even the Springfield XD guns were all slightly modified after being out for only a year.   Let the feedback from the end user determine which guns are better unless you want to be the beta tester.

Top

Your AR15 is probable not the AR15 your father had

It’s funny making a statement like that because I still feel like the AR15 is a new gun, but the reality is that it is now something that many of us had in the 1980s and 1990’s and now we have kids that are shooting them.    The AR15 is now probable the most popular firearm being sold in the Country, not only can you use it for close quarters combat and house to house clearing, there are varmint versions that are extremely accurate.   The whole durability and design of the rifle has improved dramitically, even though the M16A2 has been in service for about 25yrs and is a considerable leap in reliability over the A1, other changes have been made.

Chrome barrels use to be the thing that helped keep the direct impingement guns in a better functionality, but gun magazine improvements have reduced the number of malfunctions I see by atleast 95%.   I don’t see the failures to feed or the double feeding that I use to and it’s primarily due to the Magpul P-mags.   These magazines feed better than most and you can drive a car over them and still have them work.  Swapping out the upper receivers on an AR15 involves pushing 2 pins out, and there are many configurations from CMMG, LWRCI, DPMS that will improve the durability over lower grade guns.  If you want a combat reliable AR15, you will probable have to do a few things to an AR15 that costs under $800 to get it up to par, but overall I am very impressed with the improvements I see across the board  in the AR15 community.

Top

Taking a gun apart is even easier than you think

It was only a few years ago that I thought that I needed to schedule some time with a Glock certified gunsmith so I didn’t have to sit and read a book about assembling and disassembling a G26 which is always a royal pain.  Even though guns are fairly simple, there are always little tricks to holding a gun and knowing how to wiggle difficult parts out, no matter how many times I’ve read my directions for installing computer software or putting my damn kids legos together, a good old instruction video is better.   I  was really happy to see that Otis sends out CD and DVD instructions with their cleaning kits which probable saves there customer service department a lot of headache phone calls.

I have a few AGI gun videos I strongly suggest picking them up, but now in the age of youtube.com it’s easy to find someone who has posted there own instructional videos and I have found some really good ones.   Please be aware that I am not saying that youtube is a great source for valid info because I have seen plenty of poor gun handling skills which I wish would be removed, but as much as there are some bad points about the internet, there are plenty of good ones.   Installing gun parts and accessories if done incorrectly may mean damaging or breaking your gun or the part you are trying to install.   I know a few gun shops that limit the amount of gun accessories that they carry because they are tired of the complaints about how the gun parts were broken when they got them.

Top

Ruge 10/22 possible the most fun semi-auto

I’m sure there are plenty of guys out there, or ladies that have a lot of military experience and got to shoot some neat stuff.   Comparing the Ruger 10/22 to being  in fire control on an AC130 Spectre gun ship is comparing apples to oranges.  I will say that I have shot a lot of semi-auto military style weapons and although I have fun shooting them, bringing a wife or friend that lacks the experience or has a fear of recoil can limit the types of firearms you are using.   The first Ruger 10/22 I owned had a pretty long break in period.  I had a lot of issues getting it to reliable cycle, but I had  a lot of  friends that gave me advice on how to tweak these firearms and having a reliable break in period was normal.
A friend suggested that I just fire a lot of ammo through it and eventually it will break in.   Anothe friend said to use some hot ammo like 22lr stingers and it will speed up the process.   I tried both of these, but after about 500rds, I still was annoyed at how many jams I had, I thought it was the gun magazines, but we’ll soon find out.   My other friend suggested I take the gun appart and try to polish it with nylon pads, very similar to what you use to clean dishes.   I took  his advice and spent about 15 minutes polishing the gun, I used a little CLP inside and took it out for another range trip.    I tried shooting some cheap Remington 22LR ammo and the gun functioned almost 100% of the time.   I was probable getting a failure to fire less than every 300rds which for a 22LR rifle, that is not that bad.

Top

Beware of over cleaning

I admit that I have been called a perfectionist.  I have several years experience in working in the music industry and in that line of work, only the best work gets noticed.   When it comes to maintaining a car, you can waste a lot of time working on things that aren’t going to increase your mileage or prevent it from getting hit by another car.   Although many of us like to take our favorite firearms out of the safe from time to time, and wipe them down and look everything over, there can be a point where shoving a cleaning rod down a barrel too often will cause excessive wear and tear.

In a Carbine course, we got a good lecture on some of the BS that people are claiming about the amount of maintenance the AR15 direct impingement guns need.   The reality is that they sure as heck do need to be cleaned more than any other semi-auto military rifle, but not as much as  some people claim.  The reasons the military makes soldiers do this so often is to basically just keep them occupied.   Keeping the gun lubricated and putting a few drops where it’s needed is all we  had to do while running a Carbine course and not a single one of us had an issue.  Be careful about how much you use your gun cleaning supplies on your firearms, but also, make sure you have the right tools for the firearm.   There are some neat cleaning brushes and tools that you can get from Otis gun cleaning kits and they will help you get into the areas that are hard to reach.

Top
1 … 15 16 17 18 19 … 25 Page 17 of 25