All posts in Gun Parts

Mounts and durability

Scope MountsAdding the extra security may mean that your scope won’t come loose after a few thousand rounds.  I’ve seen guys with battle rifles with $1000 optics on them and after a few thousand rounds, the mounts came loose.  None of these individuals were using loctite.   Over torquing screws is something to be concerned about because screwing a mount in as tight as you possible can does not mean more security, it actually means more stress.   Loctite doesn’t add stress to your gun mount it just helps keep the grip on your screws so they don’t rotate after long firing periods.

There is much debate about which scope mounts are the most durable.   Some scope mounts are stronger than other just based on the quality of the metal, but the reality is that all scew on mounts can come loose over time.   One of the secrets that experienced shooters need to pass on is the use of loctite.   If you are going to be using a scope for serious shooting or putting an accessory in a firearm, you should seriously consider using loctite.

 

Top

Just like new

Glock BarrelsThere are a lot of Police trade ins and used firearms out there that can be purchased and 30%-40% below what NEW prices are.   There are a few online FFL dealers that pick up the police issued Glocks and Sigs and resell them for under $400.     I picked up a few that had a lot of holster wear but once I opened the action, they were hardly fired and they ran flawlessy.   Most of the time this is the type of condition most Police trade ins are found.
Some firearms may have actually been shot a lot, but if you think the accuracy in your Glock is starting to deteriorate, if you got it at a good price in the first place, replacing the barrel is easy and not a headache.  Most of the type a barrel will just drop right in.    Glock Barrels can be found for under $200 and will last longer than most shooters will ever know.

Top

Fixing things and uprades for Glocks

Glock PartsThings like recoil springs and firing pins are pretty much a MUST for serious shooters because sometimes it’s not always the guns fault that something wears out or breaks.  Sometimes bad ammo can wear out a firing pin faster than normal and recoil springs are going to wear out at some point.   The 2nd recommendation I would have would be to store magazine springs and followers.   Those will wear out, not as often, but as often as recoil springs.   If you’re a plinker and occassion shooter, these won’t be necessary, but if you put a couple thousand rounds through your Glock every year, something is going to wear down at some point so it’s best to have the spare parts around when it happens.

Everyone know that Glocks are tough.   I shoot just about all of the popular semi-autos out there and I still have to admit that Glocks are one of the least likely to break.   I’ve seen slide stops break, barrels blow out and slides crack, but none of them were Glocks.   Sometimes it’s a good idea to have a few extra Glock Parts in your safe just incase you ever need them, but since Glocks don’t use very many parts, it’s not much to store.

 

Top

Hobbies, accessories and reasons

Tactical GearThere area a lot of good upgrades one can do to a firearm, a fighting rifle should be customized to fit an operator.  Advanced Technology makes some quick and easy upgrades for your shotgun or carbine that can give you better grip or balance.  Shotgun shell holders on the buttstock or riding side saddle is a practical tactical upgrade you can do on your remington 870.  The fiberforce stock for the MAK90 is a way to legally get around some firearm bans and are a big step up compared to the stupid thumbhole stocks.    Attach a rifle sling that fits yoru purpose from Blue Force Gear, they come in 1 point, 2 point and 3 point attachements. Minor firearm modifications make need to be done to attache rifle slings, but do some research on various rifle sling configurations to see what works for you.

We’ve all seen the massive accessorizing of firearms in recent years.   Firearms likes SKS rifle and Mini 14s are not immune to the firearm attachements and modifications that have run rampant in the AR15 community.   In my opinion, there are a lot of firearm owners out there that had their Legos taken away from them and they brought that mindset into gun accessorizing and tactical gear stockpiling.    That’s about as harsh as I can be about why people do what they do to their firearms, but some of it is for hobbie reasons, some for practical reasons, and some because people have the obsessive compulsive behavior of needing to spend money.

 

Top

Upgrades and Doodads

Tactical GearIn the early 1990s there was a surplus of military style rifles coming into the Country.   There were goofy thumbhole stocks to avoid violating gun laws or cheap parts for kits.   Many of these rifles had pretty ugle stocks especially many of the rifles coming in from China or Egypt.   If you have one of those MAK90s or Maadis that works great, but looks like crap, you might want to upgrade your stock with a synthetic.   Many of these stocks are made in the US and can be considered US Parts to add to your legal alterations of your gun.

One of the best and easiest upgrades for any of your Chinese or Russian guns is a Fiberforce stock for your SKS.  The SKS is one of the better balanced guns that the Soviet Bloc states put out and the Fiberforce stock won’t offset that.  There is even a folding stock version that might help you if you want this as a truck gun or want to save some room in your safe.    For AR15 accessories, you can go nuts on AR15 upgrades, but think about what you really want on your gun before you just start buying, try handling your buddies guns before you just order pistol grips that you don’t really know much about or how they really feel.  Everyones hand is different and not all grips will work for you.  You can mess up the balance of your gun if you throw a heavy rail on it, especially if you don’t really need much tactical gear on your gun, why do it.

Top

CMMG Complete Uppers

CMMG M4 Uppers

Each barrel is individually magnetic particle tested. Barrels are engraved CMMG MPC 5.56 NATO 1/7. Each Upper is head spaced and test fired before shipping. Upper specific features are listed with the individual item. When selecting the gas piston operating system, it will override your choices for the bolt carrier and front sight/gas block.

 

CMMG M4 Uppers have the following standard features.Mil-spec certified 4150 chrome-moly vanadium steel M4 contour barrel, 5.56×45 NATO chamber, 1/7 twist,Hard chrome lined chamber and bore, M4 feed ramps, 11 degree recessed target crown, F marked forged front sight base, Parkerized Barrel including under the front sight base, A2 Flash hider installed with Peel washer, Forged A3 upper receivers are T marked and have extended feed ramp cuts (M4 ramps). Semi Auto bolt carrier

 

Top

Gun Modifications that are worth it

Pistol GripWhile there are many arguments about which firearm may suit you, one issue that the novice shooters often need to be educated about is that even if you are shopping for a gun that is reliable and a caliber you can handle,  everyones hands are different and knowing that a gun grip can be easily customized or modified is something often over looked.

I have picked up various firearms over the years and one thing I have ended up doing was replacing the factory versions of the grips to Hogue or Pachmayr.    There are some drawbacks to using fingered groove grips, some complain about hand cramping after long range sessions, but the reality is that you have to try it before you know it feels right.   Accuracy is another improvement I see whenever I reccomend people try different pistol grip styles for the same gun.   I’ve seen shooters change their opinions about which gun to buy just bases on the grip they were using.

Top

Rail Panels? Is the necessary?

Tango Down Rail PanelWell, I found out the hard way or should I say the sore way.    I picked a Midwest 4 rail handguard a few  years ago and loved the thing.   I didn’t have the need to use all of the rails right off the bat, but I figured I’d atleast put a flashlight on it at some point.   Well, I’m not much of the tactical accessory type, but I figured I’d go tactical with the 4 rail forearm.   Most of my ARs have the standard forearms and I’m use to holding the rifle in the traditional manner.

The traditional setup for an Ar usually means only mounting optics on the top, like an A3 AR and nothing on the sides.   I know there are some variations that still can use a flashlight, but they are not as common.   I was at the range putting my new setup to the test and after about 50rds of shooting, that cold hard, somewhat sharp 4 rail setup started to feel rough on my hands.   I’ve decided to pick up some Tango Down rail panels to help protect my hands and the rails until I settle on which kind of M4 Carbine setup I’m going to go with.   Still shopping for the right flashlight.

Top

Stock Options…..

Advanced Technology Rifle Stocks

You can legally swap your thumbhole stock on your Mak90 with having to swap out your Chinese parts for US made parts by upgrading to the ATI Fiberforce stock Advanced Technology Black Glass Filled Nylon, Thumbhole AK-47/MAK-9o.   See this list for other ATI stocks such as Mini 14, Remington 870, Ruger 10/22 ect.

 

Advanced Technology Rifle Stocks are a great way to upgrade or improve your shody surplus military guns.   I’ve used the ATI Stocks on my Mak90 gun for years because the awful thumbhole stock it came with really ruined the image.   The absurd gun laws that were implemented in the early 1990s really dumbed down the looks of some of the surplus AKs that came into the Country.

 

Top

Glock Parts

Glock PartsGLOCK MAGAZINES

Like no other pistol, GLOCK pistols permit almost unrestricted compatibility of the magazines within a caliber. Standard magazines, for instance, can also be used for backup weapons. Compact and subcompact Glock  Parts model magazines can be loaded with a convincing number of rounds – i.e. GLOCK 26: up to 33 rounds.

The innovative polymer frame of the GLOCK pistol does not require grip shells. As a result, it has
considerably more space for the magazine body and enables double-row staggered cartridge configuration. For this reason, GLOCK pistols are superior in firepower to conventional pistol models of the same size.

Top
1 3 4 5 6 Page 5 of 6