All posts in Gun Cleaning Supplies

Road trips and cleaning firearms

I was never one to jump on the bandwagon that it should  be necessary for someone in the military to break their M16 down every day and clean it.   I always thought that if the gun needed that much attention, they really should think about a new design.   The real reason the military does this for many soldiers is basically to keep everyone occupied and give them something to do.   I don’t think even an M16 needs to be cleaned more than 2 or 3 times a week, even in dirty conditions.   I’m sure that it some situations you are better off keeping  your chamber hatch closed and not opening to clean it when the air is full of sand and will just attach itself to the gun lube on your  bolt.   We sell a lot of Otis gun cleaning kits to the military for a reason though.   Everything you could want to clean a pistol or rifle is in a small compact case.

I personally find using rifle cleaning rods to be easier and for some reason I feel like I am getting a thorough cleaning.   Bore snakes work very well, but I have found them to become real messy to use if they are being used often.   You have to put them back in the clear case they came with and sometimes I feel it’s easier and cleaner to toss out dirty cleaning patches instead of putting the filthy boresnake back in it’s patch.   Bore snakes are easy to clean if you want to toss them in a wash machine, but this isn’t practical if you are on a road trip.   Otis gun cleaning kits, depending on which you purchase, should have just about every tool and brush you need to clean your firearm.   I did jam a patch in a rifle once and i did have to resort to using a cleaning rod to unjam it, but after I got the right method for “taking a pinch on the patch” and not using too much of it for a smaller caliber, I got the job done.   Otis has plenty of videos you can watch before you buy a cleaning kit if you think the kits are a little overwhelming.

Top

Beware of over cleaning

I admit that I have been called a perfectionist.  I have several years experience in working in the music industry and in that line of work, only the best work gets noticed.   When it comes to maintaining a car, you can waste a lot of time working on things that aren’t going to increase your mileage or prevent it from getting hit by another car.   Although many of us like to take our favorite firearms out of the safe from time to time, and wipe them down and look everything over, there can be a point where shoving a cleaning rod down a barrel too often will cause excessive wear and tear.

In a Carbine course, we got a good lecture on some of the BS that people are claiming about the amount of maintenance the AR15 direct impingement guns need.   The reality is that they sure as heck do need to be cleaned more than any other semi-auto military rifle, but not as much as  some people claim.  The reasons the military makes soldiers do this so often is to basically just keep them occupied.   Keeping the gun lubricated and putting a few drops where it’s needed is all we  had to do while running a Carbine course and not a single one of us had an issue.  Be careful about how much you use your gun cleaning supplies on your firearms, but also, make sure you have the right tools for the firearm.   There are some neat cleaning brushes and tools that you can get from Otis gun cleaning kits and they will help you get into the areas that are hard to reach.

Top

Thorough cleaning of firearms

Otis gun cleaning kitThis past weekend I got to test out an Otis gun cleaning kit.     I was issued the LEO deluxe cleaning kit and was amazed at how much stuff this thing had in it.    I’ve been using bore snakes for several years now and I have been pretty happy with how much time they have relieved me of when it comes to cleaning.    I have a few rifles that I spend more time with when it comes to cleaning the barrels with and every once in awhile I still dig out my rifle cleaning rod to clean them.    I was listening to a discussion with a LEO that was the PD sharp shooter and he mentioned some issues with using bore snakes.    I was a little sketical when I first heard him talk about it because I was always very happy with my previous cleaning methods.

The Hoppes bore snake is much faster to  use than a cleaning rod, brush and patch system, but If you need to do some serious chamber cleaning, especially on an AR15, you’re still going to have to use something else.   The Otis gun cleaning systems best advantage is that it is small and compact and basically does everything that a cleaning kit should do and will fit in your pocket.    There are always advantages and disadvantages to various cleaning methods, but gun maintenance is important for those are deployed.   Bore snakes can be hard to repackage once they get lubed up and you’ll have to do your own research on how to pack one up and bring it with you.   The Otis gun cleaning kit is already organized and compact, and depending on the cleaning system you use, you may be able to clean pistols, rifles and shotguns with the Deluxe Law Enforcement cleaning system.   I say again, the real benefit of the Otis gun cleaning kit is it can be as thorough as a traditional kit, but far more compact and mobile.

Top

Cleaning revolvers is easier with a boresnake

I remember the first firearm I ever cleaned was a Marlin bolt action 22LR rifle.  To clean the gun, all you had to do was pull the bolt out the back by depressing a button and pulling it back.   You could look down the chamber and see all of the fouling and know how dirty it was.   Using Hoppes cleaning solvent on a wet patch would produce a dark black gun patch on the other end when pushed through with a cleaning rod.   After you did that a few times, I’d run a cleaning brush a few times and then run a dry patch until it ran clean.

Revolvers and some semi-auto guns like the M1 Garand or the M14 and Mini 14 can be tricky and need to be cleaned from the muzzle if you are using a cleaning rod, well a few decades ago a new innovative way of cleaning these firearms was invented.   The Hoppes boresnakes are the simplist way to speed up the process and to put dangerous wear on your barrel by using a cleaning rod.   The Hoppes Boresnake is caliber specific so you may want to pick up a few for various calibers.  There are also rifle and pistol versions.

Top

Choose youre cleaning system

Otis Cleaning Systemsquickly clean the receiver, chamber, neck and bore. The brass obstruction removers are used to knock out bore obstructions and stuck cases. With the components from the brass scraper tool set the bolt, bolt carrier, locking lugs, and upper and lower receivers can be thoroughly cleaned. The lens cleaner, lens tissues and mohair lens brush will assist you in making sure your optics are clean and clear. Don’t let the poor accuracy of unclean optics prevent you from achieving the results you deserve. The comprehensive instruction booklet and mini CD-Rom with video instructions will help give you flawless performance in mission critical situations.

 

This Law Enforcement .223 Cal./5.56MM cleaning system offers you the tools to clean and maintain every aspect of your rifle. This weapons maintenance system provides you the necessary tools to completely break down and clean some of the most critical parts of your firearm. One of the best, Otis gun cleaning kits. The Memory-Flex� cleaning rods, solid brass slotted tips, 100% cotton cleaning patches, bore brushes, and the all-in-one cleaner, lubricant, and preservative allow you to

 

Top

More range time, less cleaning time

Otis gun cleaning kit I first got turned on to changing my cleaning system after I ran out of a certain type of cleaning patch for my 22lr rifle.   It really can be a royal pain in the butt when you are going from cleaning a 22lr rifle, 45acp pistol, a 30 caliber battle rifle and realizing that all you have is a bunch of 30 caliber type cleaning patches and it’s time to look around for that pair of scissors that you thought was in the kitchen and now it’s know where to be found.   If the cleaning patch isn’t cut right, you will risk jamming it in your rifle barrel and that can be a real difficult challenge.

The Otis gun cleaning system that I use is very versatile.    I admit that I do own a few bore snakes, but I’m not going to run out and pick up a bore snake for every single caliber I own.   The Otis kit I have is a universal kit that can clean most handgun and rifle calibers and is very compact and works as well as any of my cleaning rods do.   I’m sure if you had to literally scrub a bore, y ou may want a cleaning rod, but that’s a non issue for me.    The best thing about this configurtion is I only need 1 cleaning patch and depending on how you fold it, you can use it for 22LR on up to 30 caliber firearms with ease.

Top

gun cleaning on the road

I’m fortunate enough to have the opportunity to travel and witness some hard core firearms training events.   I think it should be part of everyones training to know approximately how long people should go before doing gun maintenance because the reality hits you that you may be wasting your time if you are cleaning it too much.   There are many times when an instructor will just say that it’s time to lubricate your firearm, but not break it down.   I’ve heard from many of my fellow instructors that 80% of gun cleaning is unnecessary.   According to some posts I’ve read, some say that it can actually cause more wear and damge than not cleaning.

If you are shooting a precision rifle, cleaning the barrel is of the utmost importance, but we have to realize that even though our AR15 rifles or handguns may be accurate, if we are taking real defensive or tactical training, we gotta treat them like the combat weapons that they are meant to be.   That way we have a good idea how long they can go so we can gain their trust.  When we are choosing gun cleaning supplies we should also look into the portability of the items we are brining and if we are just risking ruining our range bag because the bottles are not meant to be carried around.   Otis gun cleaning kits are probable your only real option in this category of gun cleaning unless you assemble your own.

Top

5.45×39 is still cheaper than 5.56

Just a reminder to all of you that forgot about that fact that 5.45×39 ammo is still cheaper than any of the 5.56 .   I have heard a lot of good things from our customers that have picked up the Smith & Wesson 5.45×39 upper, but I’m still not sold on it’s combat worthness.   Something about the direct impingement being dirt enough and how much worse is it going to get with that type of ammo?  One defense I’d have to make of the notion that semi-auto guns jam because they are dirty is something that I have never witnessed.   I have witnessed several handgun and AR15 malfunctions due to lack of lubrication, but I don’t know how much sludge you’re really going to end up  having if you put 1000rds through a 5.45×39 DI upper.

LWRC has recently put an AR15 upper that I am seriously considering to optain, as a matter of fact, Rogue Elite has just signed off on the papers to become a parts dealer for LWRC.   If you think having a piston driven gun means the gun is more reliable, well, I think you’ll get some pretty headed debates, but if you make the decision to pick  up any of the AR15 complete upper receievers that are piston driven, you will defanitely notice your gun is easy to clean and won’t take up 1/4 as much as you use to.   If you are a serious shooter, I would think that is worth spending the extra money for a piston conversion kit or a new piston upper.

Top

Practical and tactical should go hand in hand

Although I am a big fan of battle rifles and prefer to carry a gun bigger than an M4, if I gotta carry ammo on my person and it’s not being carried in the trunk of my car, I’ll gladly take the smaller caliber.    The M1 Garand is a great and powerful weapon, but combat is at a much faster pace and being able to suppress a target with small arms is as important as neutralizing it.  If you are a weekend warrior and are considering taking a Carbine Class, even though your training will take place in the Course, you should do research on gear and accessories before you walk in the door.

 

I always try to sit in on training courses whenever I can although I wish I had the time to actually take more classes.   I’ve written on several occassions that one of my greatest joys of watching classes is watching all of the gear fall off or fail a student and watching their slow evolution of losing gear along the way.   Theirs nothing wrong with being a tactical accessory junky, but if you have to carry an M4 all day like i’ve had to, you’ll quickly learn that lightweight, means a happy person.  There seems to be a big craze getting tactical gear with the quad rails even though most people don’t need them, and then having to go out and get rail covers, when a simple stock would have lightend the gun by a few pounds.

 

Top

Combat rifle scopes and a backup plan

When you mount your rifle scope, please do some research on how to properly level and mount it.  A properly mounted combat optic should not be over torqued and should have loctite on the screws.  I have yet to see a mount come loose on a gun that used loctite.   When you go out an spend $1000 on a combat rifle scope, ask yourself, what will you do and how will you remove the scope and aim it if the optic goes down.   If one your Trijicon rifle scopes takes a bullet, are you going to be able to see through it and still be able to lay down effective fire if you can’t see through it?  Even if you have a rifle scope that does not allow for co-witness, would it be a good idea to still attach flip up sights to the gun if there is room for them?  Always have a backup plan for your defensive carbine.

The vast majority of M4 Carbines I see at the range have optics that are top of the line.    Aimpoint and Eotech along with the Trijicon ACOG are probable the top 3.   All of these are good for a certain purpose which is mostly for close up fighting.   The Trijicon ACOG is more of a medium range combat optic depending on the type of reticle you choose.   They do have a line of red dot or even green dot optic options, also.   If you are are a weekend warrior and new to defensive shooting and tactical gear, I would suggest you think about this next statement, whenever you attach an accessory to your Carbine, think about what you would do if that accessory mount broke or the actual item failed.

 

Top
1 … 5 6 7 8 9 Page 7 of 9