All posts in Gun Cleaning Supplies

Boresnake life span, are they worth it?

Are they worth it?  Do they hold up to heavy use?   I have the same 22 caliber bore snake and it has been used in 22LR rifles, AR15 rifles, M4 Carbines, AK74 and Mini 14s.   The same bore snake is approximately 6yrs old and probable gets used about  50 times a year.   I usually run the snake through the gun about 2 times.   I may only need to do it once, but i’m use to using cleaning rods and just get in the habit.   I almost only use Break Free CLP on my firearms, and the occasional grease application, and gun cleaning is now simple.

Cleaning revolvers is probable easier than some semi-autos because there is nothing you really need to disassemble.   I have been using the Hoppes boresnakes for rifle the majority of the time because handguns just don’t seem to be that much of a hassle and I’m really not that worried about how clean the barrels are for any particular accuracy reason.    When it comes to cleaning out a bolt action rifle like a Winchester M70,  It sure does make a difference in cleaning time when you do a one, two, and then just wipe the gun down and put it away.   If you clean the guns often, from my experience there is very little worry about hard to clean areas.

Top

If there is a faster way to clean a revolover…

Please show me how I can clean a revolver faster than if I were using a boresnake?   I’ve got several boresnakes that are showing a good bit of wear, but they are still getting the job done on cleaning my rifles and I don’t even think they have gotten to their half life yet.   Just wash them in the wash machine if they start to show signs they are getting too slimy.   The only difference between the pistol and rifle bore snakes is the length and although you can still use a rifle boresnake but it may flop around a little too much.

I have always liked Hoppes boresnakes, but I recently dug out a Ruger GP100 that was a rack queen and took it to the range for a day.   I didn’t put that many rounds through it, but after spending years of range time with Glocks, XD’s and Sigs, it was fun to break out a .357 magnum and do a range  report.  The Hoppes Boresnakes that I have for my handguns have not been used that much, and when it came time to clean the gun, i popped open the cylinder, rang the bore snake through each hole, then the barrel and was trying to figure out what else I needed to do.   That was it!

Top

Watch it with those gun patches

I will admit that I have stuck gun cleaning patches in some of my firearms.   I tried to do a fast clean with a Hoppes gun cleaning kit patch on a 22LR and punched a whole through the patch and had trouble getting the cleaning rod out of the firearm.   Another time I used a wrong size cleaning patch on a Otis gun cleaning kit and almost broke the wire trying to get the patch out.    I read something funny on the internet about this happening to a few other people and they had to put the gun in a vice or wrap the cord around a tree and  yank.   That’s never a good thing.

There is still nothing wrong with using a cleaning rod, but I think boresnakes really did do damage to the old cleaning rod relic sales.   When you can simplify your gun cleaning supplies, and you can cut down on the amount of exposure to the toxic chemicals, you really are sold on upgrading your gear.   I still haven’t gotten around to putting an Otis gun cleaning kit into my butt stock or grip, but I may do so in the near future.   Cleaning brushes are something else I hate dealing with because if you don’t keep them organized, it’s hard to tell which caliber is for which, and you’ll know soon enough when the gun isn’t getting cleaned.

Top

Boresnakes and gun cleaning kits for the AR15

I’m really starting to accumulate a lot of gun cleaning accessories in recent  years.   Not that I really felt I needed them, but I was wanted to know if they were useful and helped speed up or simplify the process.   Every firearm I own needs to be cleaned in a different manor.   I am very careful how I clean my Russian SKS rifles because I have seen on several occasion that using the wrong cleaning liquids like WD40 can actually cause the gun to double or go full auto.  Bolt action rifles are in another category because you really could get away with mostly just using gun oil or a rust inhibitor.

I have several AR15 rifles and I like shooting all of them, but when it comes to cleaning, It doesn’t matter what cleaning tools I have, my LWRCI M6A2 is my favorite to clean.   I don’t need to clean the LWRCI upper receivers pistol area more less than once every 2500 rds and there is absolutely no need for using a scraping tool inside the locking lugs or the bolt carrier like my direct impingement guns.  Depending on what type of AR15 fits your needs the LWRCI gun may cost you 30-50% more than a less expensive gun, but there are hobby guns and there are combat carbines. And you get what you pay for.  How about accuracy, reliability and easy cleaning?

Top

Keeping it simple, but still wash your hands

I’ve often found it difficult to clean my firearms while wearing gloves, this gets right back to the problem that I have often come across when handing the AR15 rifle with them on.  There are smaller parts to take apart on the M4 Carbine and even though I have to get my hands dirty, I can’t get to all of the parts with gloves on.   There have been times I only fired less than 20rds through a rifle and I wasn’t in the mood for a full firearm disassemble.   If I have a firearm that has gone on a camping trip like my Marlin 336 lever action or a Winchester Model 70 bolt action, I still clean them after every trip even if they have not been fired.   Moisture can get to these types of firearms and I have had many wars with rust in the past.

There are traditional cleaning kits that may work for you, but since I have bent rods cleaning firearms, I strongly recommend against anything but a once piece rifle cleaning rod to prevent damage or issues.   Boresnakes will speed up the process of cleaning your bore and avoid the problems of putting cleaning patches, but you still need to use lube and wash them on occasion.   Otis gun cleaning kits can fit in a rifle stock, your pistol grip or your butt stock depending on how many tools you think you want to store there.

Top

Otis butt stock cleaning kit

The first time I ever got a hold of an Otis gun cleaning kit I was kinda overwhelmed with the amount of brushes and tools that were in it.   It was a universal rifle and pistol cleaning kit and I was kind of bothered by how much stuff was jiggling around inside the pouch.   I know now that this was a little more than what I really needed, but once I figured out how to use the kit and what all of the tools were for all of the other cleaning kits from Otis were easier to use.   This is from someone that started out with a bolt action 22LR rifle and a Hoppes gun cleaning kit from K-Mart.

The gun cleaning that I have grown to hate usually is from the AR15 direct impingement guns I own.   I have heard numerous firearms instructors tell me that there is such a thing as too much cleaning, and knowing exactly what parts to lube and clean on an AR15 is the key to firearm maintenance.   The Otis gun cleaning kits I use now are specific to the firearm I am cleaning. Hoppes boresnakes have served me well, but getting into the parts of an AR15 especially the locking lugs is difficult without an AR15 brush designed for that type of chamber.  There are times you will need to literally scrape the locking lugs of an AR15 and Otis has the tools and gun cleaning kit for your needs.

Top

Keeping your guns clean and preventing rust

There has  been much improvement in synthetic lubrication in recent years and I’m hoping that the older toxic gun cleaning materials that I have in my home will eventually get used up and cleaned out.  I’m not going to push Green Energy or some environmental issues on  you, but I have often wondered if I should have been more cautious in the way I cleaned some of my guns and my exposure to some of it.   I’m aware that good ventilation is important, but there are many times when I have attempted to use gloves while cleaning, but it’s very hard to get some parts back into place when you are  using them.

There was a time when I had large containers of Hoppes gun cleaning liquids and those were some of the harshest.  I’ve moved towards using Break Free CLP for most of my gun cleaning, but in recent years I have been using Mobil One synthetic oil for most of my lubrication.  Gun cleaning supplies are becoming easier to use and the old cleaning rods of the past can become your newest rack queen.   I use pistol cleaning rods fairly often, but I rarely use my one piece cleaning rod and mostly use Otis gun cleaning kits or boresnakes for my semi-auto rifles.   The less you have to touch your firearms or the dirty gun patches or cleaning brushes the better you’ll be.   Long exposures to toxic materials does catch up to you.

Top

Extensive gun cleaning and gun supplies

I recently did a walk through at a Dick’s Sporting goods store and I was recently at a Cabela’s here in Pennsylvania.   The gun cleaning kits that I had when I first got my own rifle are still being made, but I just don’t have the urge to give something like that as a Holiday present to family members.  I’m not sure exactly what is going on, but I have so many family members getting their first firearms and it’s been a lot of fun getting them setup with targets, joining gun clubs and helping them take apart and clean the guns.  It’s also been a learning experience because I  didn’t know how to do everything until I did a little research.

I still highly recommend that people have atleast one strong one piece cleaning rod for a rifle or handgun around, but that is only for clearing any bore obstructions.  Boresnakes are the easiest thing for a new shooter to use because not everyone has young eyesight and can see clearly inside the gun to know that everything has been cleaned.  For anyone getting an AR15 or knowing someone getting an AR, the Otis gun cleaning kits are probable the best gift you can give them.    Make sure you get the M16 kit because it has special brushes and tools to get into areas that a cleaning rod just won’t touch.

Top

Advanced gun cleaning for the obvious idiots

I don’t read gun boards very much anymore.  I have had good experiences with some of them and I know some people just like to bash the BS that they see, but not talk about the good.   I have met many people from the forums  in the Northeastern United States and found the vast majority to be above average in intelligence and responsibility.   I say this because I just read some of the dumbest stuff about gun cleaning and think that it may be time for some of these people to turn in their firearms due to showing since of being on the lower level of human evolution.

When you are choosing the cleaning tools for your rifle, make sure you match the cleaning brushes and cleaning patches to the caliber you are using.  If you are using a 22 caliber firearm like an AR15, do yourself a favor and use 22 caliber bore snakes.   I know that may not be common knowledge, but there are idiots out there that  may try and jam or pull a 30 caliber bore snake through the barrel, and guess what, it won’t fit.   You can mess a barrel by doing something as stupid like this, but it happens.  I’ve had pistol cleaning patches get stuck, but I was smart enough to dump a bunch of CLP into the barrel to loosen it up and then back it out, there’s your advanced gun cleaning tip of the day.

Top

Old School vs. New school cleaning

otis gun cleaning kitsotis gun cleaning kitsI have the original bottle of Hoppes gun cleaner that my first 22lr cleaning kit, I’ve kept it as a time capsule as to how long ago it was that I first got into shooting.   I remember the first time I got a cleaning patch stuck in the barrel and when I bent the 3 piece rod and ended up going out and picking up a larger and stronger cleaning rod.    We learn most of our wisdom from trial and error and putting large cleaning patches down the barrel of a 22 caliber rifle is a learning experience.   I’ve only ruined one cleaning rod to date, but I really don’t use them very much anymore.

Bore snakes were really the thing that did in the  use of me using cleaning rods.  Ever since I picked up an my first AR15, which was a Bushmaster XM15E2 with a heavy barrel, I was happy to eliminate a considerable amount of time in gun cleaning.  I was well aware that the direct impingement guns were dirty, but considering how many cleaning patches I went through on just the chamber, I was glad to have a boresnake.  Another step to my collection of gun cleaning supplies were the Otis gun cleaning kits were another step forward for  me because I got the same compactness that the Hoppes bore snake gave me with even more cleaning tools in a tiny case.   I have a cleaning rod for rifles and one that is specific for handguns, but I’m using them less and less in comparison to Otis and boresnakes.

Top
1 … 4 5 6 7 8 9 Page 6 of 9